SD 卡故障排除
前提条件
警告: 多数维修只能由经过认证的维修技术人员执行。您只能根据产品说明文件的授权,或者在联机或电话服务和支持小组指导下,进行故障排除和简单的维修。未经 Dell 授权的维修所造成的损坏不在保修范围内。请阅读并遵循产品附带的安全说明。
注: 某些 SD 卡上具有物理写保护开关。如果打开写保护开关,则 SD 卡将不可写入。
步骤
- 进入系统设置程序,确保已启用 Internal SD Card Port(内部 SD 卡端口)。
- 关闭系统和所有连接的外围设备,并断开系统与电源插座的连接。
- 移除系统的护盖。
注: 当 SD 卡出现故障时,内部双 SD 模块控制器会通知系统。在下次重新启动时,系统将显示一则消息指明此故障。如果在 SD 卡出现故障时启用冗余,则会记录严重警报,并对机箱的运行状况降级。
- 使用新的 SD 卡更换故障的 SD 卡。
- 安装系统的护盖。
- 将系统重新连接至其电源插座,并开启系统和所有连接的外围设备。
- 进入系统设置程序,确保将 Internal SD Card Port(内部 SD 卡端口)和 Internal SD Card Redundancy(内部 SD 卡冗余)设置为所需模式。
验证是否将正确的 SD 卡设置为 Primary SD Card(主 SD 卡)。
- 检查 SD 卡是否工作正常。
- 如果在 SD 卡出现故障时 Internal SD Card Redundancy(内部 SD 卡冗余)选项设置为 Enabled(已启用),系统会提示您执行重建。