XPS 13 Convertible Service Manual

Procedure

1. Peel off the tape that secures the display cable to the hard-disk plate.
2. Remove the two screws (M1.6x2.5) securing the display cable bracket to the system board
3. Lift the display cable bracket off the display cable.
4. Using the pull tab, disconnect the display cable from the system board.
5. Disconnect the touch-screen cable from the system board.
6. Disconnect the camera cable from the system board.
   
7. Open the palm-rest assembly fully and place the display assembly and palm-rest assembly face down and then remove the six screws (M2.5x3.5) that secure the display hinges to the palm-rest assembly.

   NOTE: : Ensure the surface is flat and free of objects when placing the display assembly face down.

8. Lift the display assembly off the palm-rest assembly.