Configuring
The SNMP Agent On Systems Running VMware ESXi
Server Administrator generates Simple Network Management
Protocol (SNMP) traps in response to changes in the status of sensors
and other monitored parameters. Configure one or more trap
destinations on the system running Server Administrator to send SNMP
traps to a management station.
Server Administrator supports SNMP traps on VMware ESXi but does
not support SNMP Get and Set operations because VMware ESXi does not
provide the required SNMP support. You can use the VMware vSphere
CLI to configure VMware ESXi to send SNMP traps to a management application.
NOTE: For more information
about using the VMware vSphere CLI, see the VMware support site at vmware.com/support.