Dell EMC OpenManage Installation Guide — Linux Version 9.4

Custom RPMs Based Installation

The following is an example of custom RPMs-based installation of Server Administrator, including the installation of the Remote Enablement feature and the Storage Management Service components:

1. Log in as root to the system running the supported operating system where you want to install the managed system components.
2. Insert the Dell EMC OpenManage Systems Management Tools and Documentation software into the DVD drive.
3. Navigate to the operating system-specific directory corresponding to the system.
4. Type the following command:

   rpm –ivh Server-Instrumentation/<arch>/*.rpm 
   add-StorageManagement/<arch>/*.rpm 
   RemoteEnablement/<arch>/*.rpm

   Server Administrator services do not start automatically.

   NOTE: Ensure that you install Server Instrumentation or Remote Enablement before installing Remote Access Controller or Storage Management.

   NOTE: If you choose to install the Remote Enablement feature, ensure that you install the dependent RPMs before installing this feature.

5. Start the Server Administrator services after the installation by using the command:

   sh srvadmin-services start

   NOTE: You can install Server Administrator on any system that meets operating system dependencies. However, after installation, certain Server Administrator services may not be started on unsupported systems.

   Related Links:

   Dependent RPMs for Remote Enablement