跳至主要內容
登出

歡迎來到 Dell

我的帳戶
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
  • 使用「公司管理」來管理您的 Dell EMC 網站、產品和產品層級連絡人。
登入 建立帳戶 Premier 登入 合作夥伴計畫登入
與我們連絡

您的 Dell.com 購物車

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Adding RIP Routes from Other Instances

In addition to filtering routes, you can add routes from other routing instances or protocols to the RIP process.

With the redistribute command, you can include open shortest path first (OSPF), static, or directly connected routes in the RIP process.

To add routes from other routing instances or protocols, use the following commands.

  • Include directly connected or user-configured (static) routes in RIP. ROUTER RIP mode redistribute {connected | static} [metric metric-value] [route-map map-name]
    • metric-value : the range is from 0 to 16.
    • map-name : the name of a configured route map.
  • Include specific OSPF routes in RIP. ROUTER RIP mode redistribute ospf process-id [match external {1 | 2} | match internal] [metric value] [route-map map-name] Configure the following parameters:
    • process-id : the range is from 1 to 65535.
    • metric: the range is from 0 to 16.
    • map-name : the name of a configured route map.
To view the current RIP configuration, use the show running-config command in EXEC mode or the show config command in ROUTER RIP mode.

對此內容評分

準確
實用
易懂
這篇文章對您有用嗎？
0/3000 characters
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  本文章是否有幫助？請選擇。
  評語中不得包含下列特殊字元：<>()\