- Notes, cautions, and warnings
- Safety instructions
- Removing and installing components
- Device drivers
- System setup
- Troubleshooting
- Getting help and contacting Dell
Alienware m15 R2 Service Manual
Removing the battery
Prerequisites
- Follow the procedure in Before working inside your computer.
- Remove the base cover.
- Remove the 2230 solid-state drive. (if applicable)
- Remove the 2280 solid-state drive. (if applicable)
About this task
The following image indicates the location of the battery and provides a visual representation of the removal procedure.
Steps
- Ensure that the battery cable has been disconnected from the system board.
- Remove the six screws (M2x4.5) that secure the battery to the palm-rest assembly.
- Remove the battery from the palm-rest assembly.
請給予評分 (1 到 5 顆星)。
請給予評分 (1 到 5 顆星)。
請給予評分 (1 到 5 顆星)。
本文章是否有幫助？請選擇。
評語中不得包含下列特殊字元：<>()\