Unpack the hardware and mount it in a rack.
Steps
-
Unpack the hardware.
-
Locate the following components for each appliance:
- FS8600 appliance
- Bezel
- Two power cables
- Rail kit
- SFP+ transceivers (if ordered for optical networks)
- (Fibre Channel with 10GbE appliances only) Two 1-meter
twinax cables (for single-appliance internal network connectivity
between controllers)
- Two port label tags (one attached to each controller)
- Cable labels
-
Mount each FS8600 appliance in the rack. See
the document included with the rail kit for instructions.
-
Connect both controllers in each FS8600 appliance
to a power source.
