跳至主要內容
登出

歡迎來到 Dell

我的帳戶
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
  • 使用「公司管理」來管理您的 Dell EMC 網站、產品和產品層級連絡人。
登入 建立帳戶 Premier 登入 合作夥伴計畫登入
與我們連絡

您的 Dell.com 購物車

Dell PowerEdge R750 Installation and Service Manual

PDF

Cable routing

Figure 1. 12x 3.5-inch SAS/SATA + 2 x 2.5-inch SAS/SATA with APERC in Riser 1 and optional BOSS S2 module
This image shows cable routing 12x 3.5-inch SAS/SATA + 2x2.5-inch SAS/SATA with APERC in Riser 1 and optional BOSS S2 module
Table 1. 12 x 3.5-inch SAS/SATA + 2 x 2.5-inch SAS/SATA with APERC in Riser 1 and optional BOSS S2 moduleThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
APERC_CTRL_SRC_SA1 (adapter PERC controller connector) BP_DST_SA1 (backplane signal connector)
APERC_CTRL_SRC_SB1 (adapter PERC controller connector) BP_DST_SA1 (rear backplane signal connector) and BP_DST_SB1 (backplane signal connector)
BOSS_PWR (BOSS S2 module power connector on system board) PWR_1 (BOSS S2 module power connector)
SL6_PCH_PA4 (signal connector on system board) PCIe_1/CTRL_DST_PA1 (BOSS S2 module signal connector)
SIG_PWR_0 (system board power connector) BP_PWR_1 (rear backplane power connector)
Figure 2. 12 x 3.5-inch SAS/SATA + 2 x 2.5-inch SAS/SATA with APERC in Riser 2
This image shows cable routing of 12x 3.5-inch SAS/SATA + 2x2.5-inch SAS/SATA with APERC in Riser 2
Table 2. 12 x 3.5-inch SAS/SATA + 2 x 2.5-inch SAS/SATA with APERC in Riser 2This table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
APERC_CTRL_SRC_SA1 (adapter PERC controller connector) BP_DST_SA1 (backplane signal connector)
APERC_CTRL_SRC_SB1 (adapter PERC controller connector) BP_DST_SA1 (rear backplane signal connector) and BP_DST_SB1 (backplane signal connector)
SIG_PWR_0 (system board power connector) BP_PWR_1 (rear backplane power connector)
Figure 3. 12 x 3.5-inch SAS/SATA + 2 x 2.5-inch NVMe with APERC in Riser 1
This image shows cable routing of 12x 3.5-inch SAS/SATA + 2x2.5-inch NVMe with APERC in Riser 1
Table 3. 12 x 3.5-inch SAS/SATA + 2 x 2.5-inch NVMe with APERC in Riser 1This table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
APERC_CTRL_SRC_SA1 (adapter PERC controller connector) BP_DST_SA1 (backplane signal connector)
APERC_CTRL_SRC_SB1 (adapter PERC controller connector) BP_DST_SB1 (backplane signal connector)
SIG_PWR_0 (system board power connector) BP_PWR_1 (rear backplane power connector)
SL7_CPU1_PA5 (signal connector on system board) BP_DST_PA1 (rear backplane signal connector) and BP_DST_PB1 (rear backplane signal connector)
Figure 4. 12 x 3.5-inch SAS/SATA + 2 x 2.5-inch NVMe with APERC in Riser 2
This image shows cable routing of 12x 3.5-inch SAS/SATA + 2x2.5-inch NVMe with APERC in Riser 2
Table 4. 12 x 3.5-inch SAS/SATA + 2 x 2.5-inch NVMe with APERC in Riser 2This table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
APERC_CTRL_SRC_SA1 (adapter PERC controller connector) BP_DST_SA1 (backplane signal connector)
APERC_CTRL_SRC_SB1 (adapter PERC controller connector) BP_DST_SB1 (backplane signal connector)
SIG_PWR_0 (system board power connector) BP_PWR_1 (rear backplane power connector)
SL7_CPU1_PA5 (signal connector on system board) BP_DST_PA1 (rear backplane signal connector) and BP_DST_PB1 (rear backplane signal connector)
Figure 5. 12 x 3.5-inch SAS/SATA + 4 x 2.5-inch SAS/SATA with APERC in Riser 2
This image shows cable routing of 12 x 3.5-inch SAS/SATA + 4 x 2.5-inch SAS/SATA with APERC in Riser 2
Table 5. 12 x 3.5-inch SAS/SATA + 4 x 2.5-inch SAS/SATA with APERC in Riser 2 This table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
APERC_CTRL_SRC_SA1 (adapter PERC controller connector) BP_DST_SA1 (backplane signal connector)
APERC_CTRL_SRC_SB1 (adapter PERC controller connector) BP_DST_SA1 (rear backplane signal connector)) and BP_DST_SB1 (backplane signal connector)
SIG_PWR_0 (system board power connector) BP_PWR_1 (rear backplane power connector)
Figure 6. 12 x 3.5-inch SAS/SATA + 4 x 2.5-inch NVMe with APERC in Riser 2 and optional BOSS S2 module
This image shows cable routing of 12 x 3.5-inch SAS/SATA + 4 x 2.5-inch NVMe with APERC in Riser 2 and optional BOSS S2 module
Table 6. 12 x 3.5-inch SAS/SATA + 4 x 2.5-inch NVMe with APERC in Riser 2 and optional BOSS S2 moduleThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
APERC_CTRL_SRC_SA1 (adapter PERC controller connector) BP_DST_SA1 (backplane signal connector)
APERC_CTRL_SRC_SB1 (adapter PERC controller connector) BP_DST_SB1 (backplane signal connector)
BOSS_PWR (BOSS S2 module power connector on system board) PWR_1 (BOSS S2 module power connector)
SL6_PCH_PA4 (signal connector on system board) PCIe_1/CTRL_DST_PA1 (BOSS S2 module signal connector)
SIG_PWR_0 (system board power connector) BP_PWR_1 (rear backplane power connector)
SL4_CPU1_PA2 (signal connector on system board) BP_DST_PA1 (rear backplane signal connector) and BP_DST_PB1 (rear backplane signal connector)
SL7_CPU1_PA5 (signal connector on system board) BP_DST_PA2 (rear backplane signal connector) and BP_DST_PB2 (rear backplane signal connector)
Figure 7. 8 x 2.5-inch SAS with NVMe and fPERC
This image shows cable routing of 8 x 2.5-inch SAS with NVMe and fPERC
Table 7. 8 x 2.5-inch SAS with NVMe and fPERCThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
SL1_CPU2_PB1 (signal connector on system board) BP_DST_PA1 (backplane signal connector)
SL2_CPU2_PA1 (signal connector on system board) BP_DST_PB1 (backplane signal connector)
SL3_CPU1_PB2 (signal connector on system board) and SL4_CPU1_PA2 (signal connector on system board) BP_DST_PA2 (backplane signal connector) and BP_DST_PB2 (backplane signal connector)
SL7_CPU1_PA5 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
Figure 8. 8 x 2.5-inch SAS with fPERC and Riser 1C
This image shows cable routing of 8 x 2.5-inch SAS with fPERC and Riser 1C
Table 8. 8 x 2.5-inch SAS with fPERC and Riser 1CThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_PA1 (fPERC controller connector) BP_DST_PA1 (backplane signal connector) and BP_DST_PB1 (backplane signal connector)
CTRL_SRC_PB1 (fPERC controller connector) BP_DST_PA2 (backplane signal connector) and BP_DST_PB2 (backplane signal connector)
SL1_CPU2_PB1 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
SL3_CPU1_PB2 (signal connector on system board) and SL4_CPU1_PA2 (signal connector on system board) Riser 1C (signal connector from Riser 1C)
Figure 9. 16 x 2.5-inch NVMe with fPERC and Riser 1C
This image shows cable routing of 16 x 2.5-inch NVMe with fPERC and Riser 1C
Table 9. 16 x 2.5-inch NVMe with fPERC and Riser 1CThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_PA1 (fPERC controller connector) BP_DST_PA1 (backplane signal connector) and BP_DST_PB1 (backplane signal connector)
CTRL_SRC_PB1 (fPERC controller connector) BP_DST_PA2 (backplane signal connector) and BP_DST_PB2 (backplane signal connector)
SL1_CPU2_PB1 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
SIG_PWR_2 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_PA1 (fPERC controller connector) BP_DST_PA1 (backplane signal connector) and BP_DST_PB1 (backplane signal connector)
CTRL_SRC_PB1 (fPERC controller connector) BP_DST_PA2 (backplane signal connector) and BP_DST_PB2 (backplane signal connector)
SL2_CPU2_PA1 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
SL3_CPU1_PB2 (signal connector on system board) and SL4_CPU1_PA2 (signal connector on system board) Riser 1C (signal connector from Riser 1C)
Figure 10. 16 x 2.5-inch NVMe direct
This image shows cable routing of 16 x 2.5-inch NVMe direct
Table 10. 16 x 2.5-inch NVMe directThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
Riser 3 (R3 paddle card on Riser 3 slot) BP_DST_PA1 (backplane signal connector) and BP_DST_PB1 (backplane signal connector)
SL1_CPU2_PB1 (signal connector on system board) BP_DST_PA2 (backplane signal connector)
SL2_CPU2_PA1 (signal connector on system board) BP_DST_PB2 (backplane signal connector)
SL3_CPU1_PB2 (signal connector on system board) and SL4_CPU1_PA2 (signal connector on system board) BP_DST_PA1 (backplane signal connector) and BP_DST_PB1 (backplane signal connector)
SIG_PWR_2 (system board power connector) BP_PWR_1 (backplane power connector)
Riser 1 (R1 paddle card on Riser 1 slot) BP_DST_PA2 (backplane signal connector) and BP_DST_PB2 (backplane signal connector)
Figure 11. 16 x 2.5-inch NVMe with fPERC
This image shows cable routing of 16 x 2.5-inch NVMe with fPERC
Table 11. 16 x 2.5-inch NVMe with fPERCThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_PA1 (fPERC controller connector) BP_DST_PA1 (backplane signal connector) and BP_DST_PB1 (backplane signal connector)
CTRL_SRC_PB1 (fPERC controller connector) BP_DST_PA2 (backplane signal connector) and BP_DST_PB2 (backplane signal connector)
SL1_CPU2_PB1 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
SIG_PWR_2 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_PA1 (fPERC controller connector) BP_DST_PA1 (backplane signal connector) and BP_DST_PB1 (backplane signal connector)
CTRL_SRC_PB1 (fPERC controller connector) BP_DST_PA2 (backplane signal connector) and BP_DST_PB2 (backplane signal connector)
SL3_CPU1_PB2 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
Figure 12. 16 x 2.5-inch SAS/SATA with fPERC
This image shows cable routing of 16 x 2.5-inch SAS/SATA with fPERC
Table 12. 16 x 2.5-inch SAS/SATA with fPERCThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_SB1 (fPERC controller connector) BP_DST_SB1 (backplane signal connector)
SL3_CPU1_PB2 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
Figure 13. 16 x 2.5-inch SAS/SATA with fPERC and Riser 1C
This image shows cable routing of 16 x 2.5-inch SAS/SATA with fPERC and Riser 1C
Table 13. 16 x 2.5-inch SAS/SATA with fPERC and Riser 1CThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_SB1 (fPERC controller connector) BP_DST_SB1 (backplane signal connector) and BP_DST_PB1 (backplane signal connector)
SL1_CPU2_PB1 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
SL3_CPU1_PB2 (signal connector on system board) and SL4_CPU1_PA2 (signal connector on system board) Riser 1C (signal connector from Riser 1C)
Figure 14. 16 x 2.5-inch SAS/SATA + 8 x 2.5-inch NVMe with fPERC
This image shows cable routing of 16 x 2.5-inch SAS/SATA + 8 x 2.5-inch NVMe with fPERC
Table 14. 16 x 2.5-inch SAS/SATA + 8 x 2.5-inch NVMe with fPERC This table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_SB1 (fPERC controller connector) BP_DST_SB1 (backplane signal connector)
SL3_CPU1_PB2 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
SL1_CPU2_PB1 (signal connector on system board) BP_DST_PA1 (backplane signal connector)
SL2_CPU2_PA1 (signal connector on system board) BP_DST_PB1 (backplane signal connector)
SL4_CPU1_PA2 (signal connector on system board) BP_DST_PA2 (backplane signal connector)
SL7_CPU1_PA5 (signal connector on system board) BP_DST_PB2 (backplane signal connector)
SIG_PWR_2 (system board power connector) BP_PWR_1 (backplane power connector)
Figure 15. 24 x 2.5-inch SAS/SATA with expander and fPERC
This image shows cable routing of 24 x 2.5-inch SAS/SATA with expander and fPERC
Table 15. 24 x 2.5-inch SAS/SATA with expander and fPERCThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_PB1 (fPERC controller connector) DST_SB1 (backplane expander signal connector)
SL3_CPU1_PB2 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
SIG_PWR_2 (system board power connector) BP_PWR_2 (backplane power connector)
Figure 16. 24 x 2.5-inch SAS/SATA with expander, fPERC, and Riser 1C
This image shows cable routing of 24 x 2.5-inch SAS/SATA with expander, fPERC, and RIser 1C
Table 16. 24 x 2.5-inch SAS/SATA with expander, fPERC, and Riser 1CThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_SB1 (fPERC controller connector) DST_SB1 (backplane expander signal connector)
SL1_CPU2_PB1 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
SIG_PWR_2 (system board power connector) BP_PWR_2 (backplane power connector)
SL3_CPU1_PB2 (signal connector on system board) and SL4_CPU1_PA2 (signal connector on system board) Riser 1C (signal connector from Riser 1C)
Figure 17. 24 x 2.5-inch SAS/SATA (8 universal + 16 SAS) with expander and fPERC
This image shows cable routing of 24 x 2.5-inch SAS/SATA (8 universal + 16 SAS) with expander and fPERC
Table 17. 24 x 2.5-inch SAS/SATA (8 universal + 16 SAS) with expander and fPERCThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_SB1 (fPERC controller connector) DST_SB1 (backplane signal connector)
SL3_CPU1_PB2 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
SL1_CPU2_PB1 (signal connector on system board) BP_DST_PA1 (backplane signal connector)
SL2_CPU2_PA1 (signal connector on system board) BP_DST_PB1 (backplane signal connector)
SL4_CPU1_PA2 (signal connector on system board) BP_DST_PA2 (backplane signal connector)
SL7_CPU1_PA5 (signal connector on system board) BP_DST_PB2 (backplane signal connector)
SIG_PWR_2 (system board power connector) BP_PWR_2 (backplane power connector)
Figure 18. 24 x 2.5-inch SAS/SATA with dual controller, expander, fPERC, and APERC in Riser 1
This image shows cable routing of 24 x 2.5-inch SAS/SATA dual controller with expander, fPERC, anfd APERC in Riser 1
Table 18. 24 x 2.5-inch SAS/SATA with dual controller, expander, fPERC, and APERC in Riser 1This table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
APERC_CTRL_SRC_SA1 (adapter PERC controller connector) DST_SB1 (backplane expander signal connector)
SIG_PWR_2 (system board power connector) BP_PWR_2 (backplane power connector)
SL3_CPU1_PB2 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
Figure 19. 24 x 2.5-inch SAS/SATA with dual controller, expander, fPERC, and APERC in Riser 2
This image shows cable routing of 24 x 2.5-inch SAS/SATA dual controller with expander, fPERC, anfd APERC in Riser 1
Table 19. 24 x 2.5-inch SAS/SATA with dual controller, expander, fPERC, and APERC in Riser 2This table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
APERC_CTRL_SRC_SA1 (adapter PERC controller connector) DST_SB1 (backplane expander signal connector)
SIG_PWR_2 (system board power connector) BP_PWR_2 (backplane power connector)
SL3_CPU1_PB2 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
Figure 20. 24 x 2.5-inch SAS/SATA + 2 x 2.5-inch SAS with expander and fPERC
This image shows cable routing of 24 x 2.5-inch SAS/SATA + 2 x 2.5-inch SAS with expander and fPERC,
Table 20. 24 x 2.5-inch SAS/SATA + 2 x 2.5-inch SAS with expander and fPERCThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_SB1 (fPERC controller connector) DST_SB1 (backplane expander signal connector)
SIG_PWR_2 (system board power connector) BP_PWR_2 (backplane power connector)
SL3_CPU1_PB2 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
SIG_PWR_0 (system board power connector) BP_PWR_1 (rear backplane power connector)
SRC_SA1 (backplane expander signal connector) BP_DST_SA1 (rear backplane expander signal connector)
Figure 21. 24 x 2.5-inch SAS/SATA + 2 x 2.5-inch NVMe with expander and fPERC
This image shows cable routing of 24 x 2.5-inch SAS/SATA + 2 x 2.5-inch NVMe with expander and fPERC,
Table 21. 24 x 2.5-inch SAS/SATA + 2 x 2.5-inch NVMe with expander and fPERCThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_SB1 (fPERC controller connector) DST_SB1 (backplane expander signal connector)
SIG_PWR_2 (system board power connector) BP_PWR_2 (backplane power connector)
SL3_CPU1_PB2 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
SIG_PWR_0 (system board power connector) BP_PWR_1 (rear backplane power connector)
SL7_CPU1_PA5 (signal connector on system board) BP_DST_PA1 (rear backplane expander signal connector) and BP_DST_PB1 (rear backplane expander signal connector)
Figure 22. 24 x 2.5-inch SAS/SATA + 4 x 2.5-inch SAS with expander and fPERC
This image shows cable routing of 24 x 2.5-inch SAS/SATA + 4 x 2.5-inch SAS with expander and fPERC
Table 22. 24 x 2.5-inch SAS/SATA + 4 x 2.5-inch SAS with expander and fPERCThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_SB1 (fPERC controller connector) DST_SB1 (backplane expander signal connector)
SIG_PWR_2 (system board power connector) BP_PWR_2 (backplane power connector)
SL3_CPU1_PB2 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
SIG_PWR_0 (system board power connector) BP_PWR_1 (rear backplane power connector)
SRC_SA1 (backplane expander signal connector) BP_DST_SA1 (rear backplane expander signal connector)
Figure 23. 24 x 2.5-inch SAS/SATA + 4 x 2.5-inch NVMe with expander and fPERC
This image shows cable routing of 24 x 2.5-inch SAS/SATA + 4 x 2.5-inch NVMe with expander and fPERC
Table 23. 24 x 2.5-inch SAS/SATA + 4 x 2.5-inch NVMe with expander and fPERCThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_SB1 (fPERC controller connector) DST_SB1 (backplane expander signal connector)
SIG_PWR_2 (system board power connector) BP_PWR_2 (backplane power connector)
SL3_CPU1_PB2 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
SIG_PWR_0 (system board power connector) BP_PWR_1 (rear backplane power connector)
SL4_CPU1_PA2 (signal connector on system board) BP_DST_PA1 (rear backplane signal connector) and BP_DST_PB1 (rear backplane signal connector)
SL7_CPU1_PA5 (signal connector on system board) BP_DST_PA2 (rear backplane signal connector) and BP_DST_PB2 (rear backplane signal connector)
Figure 24. 24 x 2.5-inch SAS/SATA with separate controller, expander, APERC in R1, and fPERC
This image shows cable routing of 24 x 2.5-inch SAS/SATA with separate controller, expander, APERC in R1, and fPERC
Table 24. 24 x 2.5-inch SAS/SATA with separate controller, expander, APERC in R1, and fPERCThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_SB1 (fPERC controller connector) DST_SB1 (backplane expander signal connector)
SIG_PWR_2 (system board power connector) BP_PWR_2 (backplane power connector)
SL3_CPU1_PB2 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
SIG_PWR_0 (system board power connector) BP_PWR_1 (rear backplane power connector)
APERC_CTRL_SRC_SA1 (adapter PERC controller connector) BP_DST_SA1 (rear backplane expander signal connector)
Figure 25. 24 x 2.5-inch SAS/SATA with separate controller, expander, APERC in R2, and fPERC
This image shows cable routing of24 x 2.5-inch SAS/SATA separate controller with expander, APERC in R2, and fPERC
Table 25. 24 x 2.5-inch SAS/SATA with separate controller, expander, APERC in R2, and fPERCThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_SB1 (fPERC controller connector) DST_SB1 (backplane expander signal connector)
SIG_PWR_2 (system board power connector) BP_PWR_2 (backplane power connector)
SL3_CPU1_PB2 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
SIG_PWR_0 (system board power connector) BP_PWR_1 (rear backplane power connector)
APERC_CTRL_SRC_SA1 (adapter PERC controller connector) BP_DST_SA1 (rear backplane expander signal connector)
Figure 26. 24 x 2.5-inch NVMe switch
This image shows 24 x 2.5-inch NVMe switch
Table 26. 24 x 2.5-inch NVMe switch with This table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
SIG_PWR_1 (system board power connector) BP_PWR_2 (backplane power connector)
SL3_CPU1_PB2 (signal connector on system board) DST_PB2 (backplane switch signal connector)
SL4_CPU1_PA2 (signal connector on system board) DST_PA2 (backplane switch signal connector)
SL1_CPU2_PB1 (signal connector on system board) DST_PB1 (backplane switch signal connector)
SL2_CPU2_PA1 (signal connector on system board) DST_PA1 (backplane switch signal connector)
Figure 27. 24 x 2.5-inch NVMe switch with 2 front PERC
This image shows 24 x 2.5-inch NVMe switch with 2 front PERC
Table 27. 24 x 2.5-inch NVMe switch with 2 front PERCThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_PA1 (fPERC controller connector) DST_PA2 (backplane switch signal connector)
CTRL_SRC_PB1 (fPERC controller connector) DST_PB2 (backplane switch signal connector)
SL3_CPU1_PB2 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
SIG_PWR_2 (system board power connector) BP_PWR_2 (backplane power connector)
CTRL_SRC_PA1 (fPERC controller connector) DST_PA2 (backplane switch signal connector)
CTRL_SRC_PB1 (fPERC controller connector) DST_PB2 (backplane switch signal connector)
SL1_CPU2_PB1 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
Figure 28. 16 x 2.5 SAS/SATA + 8 x 2.5 NVMe Dual PERC
This image shows 24 x 2.5-inch NVMe switch with 2 front PERC
Table 28. 16 x 2.5 SAS/SATA + 8 x 2.5 NVMe Dual PERCThis table shows connector information
From To
SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_PA1 (fPERC controller connector) DST_PA1 (backplane switch signal connector)
CTRL_SRC_PB1 (fPERC controller connector) DST_PA2 (backplane switch signal connector)
SL3_CPU1_PB2 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
SIG_PWR_2 (system board power connector) BP_PWR_1 (backplane power connector)
CTRL_SRC_PA1 (fPERC controller connector) DST_PB1 (backplane switch signal connector)
CTRL_SRC_PB1 (fPERC controller connector) DST_PB2 (backplane switch signal connector)
SL1_CPU2_PB1 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
CTRL_SRC_SB1 (fPERC controller connector) BP_DST_SB1 (backplane signal connector)
Figure 29. Management Interface Card (MIC)
This image shows the cable routing for the Management Interface Card (MIC)
NOTE:20-pin for Nvidia Mellanox Dell DPU. 20-pin for Pensando Dell DPU. Nvidia Mellanox 100 Gb Dell DPU power connector requires power cable to system board SIG_PWR_0.
Table 29. Management Interface Card (MIC)This table shows connector information
From To
J_REAR_SERIAL 1 (Rear I/O card connector) MIC_UART (MIC connector)
MIC_CON1 (MIC connector) 20 PIN (Dell DPU connector)
MB_SIG_PWR_0 (system board power connector) 6 PIN (Dell DPU connector)

對此內容評分

準確
實用
易懂
這篇文章對您有用嗎？
0/3000 characters
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  本文章是否有幫助？請選擇。
  評語中不得包含下列特殊字元：<>()\