跳至主要內容
登出

歡迎來到 Dell

我的帳戶
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
  • 使用「公司管理」來管理您的 Dell EMC 網站、產品和產品層級連絡人。
登入 建立帳戶 Premier 登入 合作夥伴計畫登入
與我們連絡

您的 Dell.com 購物車

Dell PowerEdge R750 Installation and Service Manual

PDF

Options to set up iDRAC IP address

To enable communication between your system and iDRAC, you must first configure the network settings based on your network infrastructure. The network settings option is set to DHCP, by default.
NOTE:For static IP configuration, you must request for the settings at the time of purchase.

You can set up the iDRAC IP address using one of the interfaces in the table below. For information about setting up iDRAC IP address, see the documentation links provided in the table below.

Table 1. Interfaces to set up iDRAC IP addressThis table lists the interfaces to set up the iDRAC IP address.
Interface Documentation links
iDRAC Settings utility Integrated Dell Remote Access Controller 用户指南。 or for system specific Integrated Dell Remote Access Controller 用户指南。, go to PowerEdge 手册 > Product Support page of your system > Documentation.
NOTE:To determine the most recent iDRAC release for your platform and for latest documentation version, see KB article KB78115.
OpenManage Deployment Toolkit PowerEdge 手册 > Open Manage Deployment Toolkit.
iDRAC Direct Integrated Dell Remote Access Controller 用户指南。 or for system specific Integrated Dell Remote Access Controller 用户指南。, go to PowerEdge 手册 > Product Support page of your system > Documentation.
NOTE:To determine the most recent iDRAC release for your platform and for latest documentation version, see KB article KB78115.
Lifecycle Controller Integrated Dell Remote Access Controller 用户指南。 or for system specific 戴尔 Lifecycle Controller 用户指南, go to PowerEdge 手册 > Product Support page of your system > Documentation.
NOTE:To determine the most recent iDRAC release for your platform and for latest documentation version, see KB article KB78115.
Server LCD panel LCD panel section.
iDRAC Direct and Quick Sync 2 (optional) Integrated Dell Remote Access Controller 用户指南。 or for system specific 戴尔 Lifecycle Controller 用户指南, go to PowerEdge 手册 > Product Support page of your system > Documentation.
NOTE:To determine the most recent iDRAC release for your platform and for latest documentation version, see KB article KB78115.
NOTE:To access iDRAC, ensure that you connect the ethernet cable to the iDRAC dedicated network port or use the iDRAC Direct port by using the USB cable. You can also access iDRAC through the shared LOM mode, if you have opted for a system that has the shared LOM mode enabled.

對此內容評分

準確
實用
易懂
這篇文章對您有用嗎？
0/3000 characters
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  本文章是否有幫助？請選擇。
  評語中不得包含下列特殊字元：<>()\