Vejledninger og dokumenter
Ugyldig indtastning. Brug kun bogstaver, tal og specialtegn undtagen <>)(%/;,=#--/*
8 ud af 8 vist
This document describes how to use the Rapid Appliance Self-Recovery (RASR) to restore the factory settings on the XC Node system.
Updated: May 18, 2026
The Integrated Dell Remote Access Controller 9 (iDRAC9) User's Guide provides comprehensive information on the features, setup, and management of the iDRAC9 interface.
Updated: March 16, 2026
This document provides information about Dell iDRAC Telemetry feature for collecting and streaming live system data from PowerEdge servers to a centralized monitoring service, providing real-time visibility into server health and performance.
Updated: September 23, 2025
The purpose of this guide is to assist you with the best possible experience using Life Cycle Manager along with the XC Series 14th, 15th, and 16th, 17th generation appliances using an VMware ESXi, AHV, and Hyper-V. This document contains recommendations and support statements.
Updated: August 14, 2026
This document contains release notes for XC Core appliances.
Updated: May 20, 2026
The guide provides an overview and configuration steps for Remote Direct Memory Access (RDMA) on Dell XC Series Appliances and XC Core Systems, including supported platforms and technical support resources.
Updated: May 20, 2026
This document provides information about the supported software, firmware, and hardware versions and technical specifications for the XC660, XC760, XC7625, XC660xs, and XC760xa models of the Dell XC Series Hyper-Converged Appliance.
Updated: August 30, 2024
XC760 Installation and Service Manual
Updated: October 17, 2023