iDRAC9 - 7.xx Series

Denne artikel forklarer, hvordan du opretter og importerer et iDRAC-certifikat.

Denne artikel indeholder oplysninger om fejlen LIC008, der opstår ved import af IDRAC-licensen.

This article provides information about exporting the Tech Support Report (TSR) / SupportAssist Collection, including the Operating System, Application Data, and the RAID controller log. This is done using the integrated Dell Remote Access Controller (iDRAC) command-line interface (CLI) of Dell PowerEdge servers generations 12, 13, and 14.

Nedenstående artikel indeholder en midlertidig mekanisme til gendannelse af PowerEdge-systemer fra den vigtige logpost "SWC5008 kan ikke få adgang til det forreste LED-panel pga. en hardwarefejltilstand" for nogle få versioner af iDRAC.

Fra og med iDRAC9 7.30.10.50 og iDRAC10 1.30.10.50 er standardindstillingen for grundlæggende HTTP-godkendelse ændret til "ikke-annonceret" (tidligere standardindstilling aktiveret). Disse ændringer blev foretaget for at forbedre legitimationssikkerheden og reducere utilsigtet eksponering af HTTP-basisgodkendelse i Redfish-tjenester.

Storage components may not be displayed, or the status may appear as Unknown. Also, external storage hard disks may be incorrectly detected as local storage with incorrect parameter values. These issues occur after upgrading the iDRAC9 firmware to version 7.20.60.50, 7.20.70.50 or 7.20.80.50.

Implementering af en skabelon med konfigurationen af den virtuelle disk indstillet til handlingen 'CREATE' mislykkes med fejlen: "Kan ikke oprette en virtuel disk pga. en ugyldig kombination af span count eller antal diske, der er specificeret for det valgte RAID-niveau"

Dell PowerEdge XR810t and XR8620t compute sleds return "Device not present (Parameter out of range)" for multiple chassis devices. This message is seen through Intelligent Management Protocol Interface (IPMI) Field Replaceable Unit (FRU) commands.

This article provides information about a condition in which the server fans spin at 100% with NVIDIA A100 GPUs installed after updating the IDRAC firmware.

When AC Power cycle is done on a Modular server with BOSS-N1 Modular ET Card and Secure Enterprise Key Manager (SEKM), the BOSS Physical Disks (M.2 drives behind BOSS Controller) remain locked and the Virtual Disk is not present in the iDRAC Storage view.

Existing Server Configuration Profiles (SCP) or Deployment Templates that include iDRAC User SNMPv3 Attributes may stop working after iDRAC9 is updated to 7.20.30.00 or higher.

Dell Enterprise catalogs in downloads.dell.com may report a January 2025 release as latest catalog. The latest version of the Dell Enterprise Catalogs may not be available at downloads.dell.com.

SNMPv3-afstemningsmeddelelser (GET) og -advarsler (traps) holder op med at fungere med eksisterende SNMPv3-aktiverede brugere efter opdatering af iDRAC til 7.20.30.00.

Dell Connectivity Client for PowerEdge is a lightweight software plug-in installed on the integrated Dell Remote Access Controller (iDRAC). As of December 2024, DCC is factory installed on the iDRAC of Dell PowerEdge 15th, 16th, and 17th generation servers.

Staging both PDB CPLD and motherboard CPLD updates simultaneously may cause a corrupted PDB.

Dell OpenManage MIB er version 11.1.0 er den sidste udgivelse af et forsøg på at konsolidere SNMP MIB-filer, der definerer forskellige Dell-serverkomponenter.

Nogle Dell PowerEdge 16. generations (16G)-servere kan udvise en 0V-aflæsning for CPU-spændingsregulatorsensorer (Central Processing Unit) i brugergrænsefladerne til Integrated Dell Remote Access Controller 9 (iDRAC9).

The "Predictive failure reported for disk x" error continues to be logged every 24 hours, even after the identified drive has been replaced. The issue only affects drives connected to PERC Controllers in RAID configuration.

Få hjælp til at få adgang til Dell PowerEdge iDRAC, herunder standardbrugernavne og -adgangskode, nulstillingsmetode og fejlfinding ved fjernlogin.

The iDRAC9 Virtual Console remains blank after an iDRAC firmware update when accessed by the Fully Qualified Domain name (FQDN) and a trusted certificate.

Dell RACADM kan mislykkes med den eksterne indsamling af SupportAssist-logfiler, når fejlfindingsindstillingen er valgt, og samlingen har en maksimal filstørrelse.

I nogle tilfælde kan firmwareopdateringsjobbet muligvis ikke startes, når der udføres en firmwareopdatering via tilgængelige iDRAC-grænseflader.

When using the Broadcom BCM57608 with firmware 22.92.xx.xx, the iDRAC web user interface (UI) displays alarms indicating a warning status for receive (RX) input power. It also shows a critical status for transmit (TX) bias current.

iDRAC9: SupportAssist log Collection takes more than 60 minutes to complete.

An "HWC1110" event was reported during the iDRAC Firmware update.

On Dell PowerEdge 14G servers using iDRAC9 in shared LOM configuration, an ISO image mounted using Remote File Share (RFS) may get unmounted intermittently.

Under visse omstændigheder mislykkes iDRAC9-smartcard-login uden at vise en fejlmeddelelse.

This article describes how to find the iDRAC's current MAC address.

PowerEdge T550 iDRAC WebGUI System Health Indicates Warning After Power Off in Low Temperature Environments <20°C (68°F)

PowerEdge 14/15G servers cannot downgrade to iDRAC9 firmware versions 4.40.10.00 and older once the iDRAC9 has installed the June 2024 firmware release.