Vejledninger og dokumenter
Ugyldig indtastning. Brug kun bogstaver, tal og specialtegn undtagen <>)(%/;,=#--/*
7 ud af 7 vist
This document explains how to configure source and destination VNX systems for MirrorView/Synchronous (MirrorView/S), a limited-distance synchronous data mirroring facility that provides high-availability and disaster recovery.
Updated: August 16, 2013
This document explains how to set up MirrorView/Synchronous in the NS gateway or NSX environment using VNX.
Updated: August 15, 2013
This document explains how to set up MirrorView/Synchronous in the NS gateway or NSX environment using VNX.
Updated: July 16, 2012
This technical module explains how to configure source and destination VNX systems for MirrorView/Synchronous (MirrorView/S), a limited-distance synchronous data mirroring facility that provides high-availability and disaster recovery for NS series gateway and NSX series VNX systems.
Updated: July 16, 2012
This manual describes the CLI commands for setting up, configuring, and managing EMC MirrorView/Synchronous software.
Updated: September 02, 2009
Explains how to use the EMC MirrorView/Synchronous Command Line Interface (CLI) commands to create and manage remote mirrors.
Updated: February 01, 2007
Describes how to use Navisphere Manager for setting up and using MirrorView/Synchronous remote mirrors.
NOTE: Starting with versions 03.24 and 02.24, the MirrorView/Synchronous for Navisphere Administrator’s Guide is no longer available. You can find all information for the MirrorView/S software in the Navisphere Manager help, located at Software J-O > Navisphere Management Suite > Maintenance/Administration > Navisphere Manager Help.
Updated: August 01, 2006