NetWorker Module for Databases and Applications

Dette dokument fremhæver minimumversioner samt anbefalede og nyeste kodeversioner for Dell Technologies Enterprise- og Datacenterinfrastruktur-produkter. Vi evaluerer og overvåger omhyggeligt kodeimplementeringsdata for at sikre, at produktudgivelser lever op til vores strenge forventninger om at give vores kunder pålidelige produkter og løsninger.

Denne artikel dokumenterer løsningen på NMC-installationens manglende start af gstdbinit-processen.

NetWorker is configured to backup Azure Virtual Machine (VM) snapshots. During the backup workflow, successful Azure VM disk backups are performed; however, the 'Azure' save set fails.

Kan ikke se genoprettelseslogfilerne fra overvågningsfanen NetWorker Web User Interface (NWUI) ved at klikke på ikonet med tre prikker og vælge "Vis meddelelser", selvom der ikke er nogen indvirkning på genoprettelsesjobbet.

Tomme VMware-grupper rapporterer fejl i sikkerhedskopieringer.

En gendannelse af opstandelsen af en virtuel maskine (VM) udføres ved hjælp af vProxy-enheden NetWorker VMware Protection (NVP). Det valgte lagringssæt findes ikke på en Data Domain-enhed. det er en klonkopi på en AFTD-enhed. Opstandelsesprocessen (klon) afslutter rapporteringen "nsrvproxy_recover: Stødte på hukommelsesallokeringsfejl under overvågning af fremskridt med opstandelsesklonjob."

Virtual Machine (VM) backups are configured through the NetWorker VMware Protection (NVP) vProxy appliance. The VMs reside on vSAN Express Storage Architecture (ESA) datastores. VM backups complete successfully but restores fail returning an "unsupported format" error.

Virtual Machine (VM) Revert restores performed through the NetWorker Web User Interface (NWUI) do not start. The recovery job gets stuck in the NWUI Monitoring "Recover Jobs" window and cannot be cancelled.

The NetWorker server software is deployed on a Red Hat Enterprise Linux Pacemaker (PCS) cluster. After upgrading NetWorker from 19.6.1.x (or earlier) to 19.7.0.0-19.7.0.3 or 19.8.0.0-19.8.0.1, NetWorker server services do not start.

NetWorker services fail to start on a Red Hat pacemaker (pcs) High Availability cluster after upgrading to a NetWorker 19.7.0.x release (or later).

Use mminfo to extract deduplication statistics for a NetWorker save set on a Data Domain; the output follows version:cloneid:backup:pre‑compression:post‑compression and shows deduplicate compression process.

Integrationen af NetWorker VMware Protection (NVP) er konfigureret med vProxy-enheden. VProxy-implementeringen havde nogle problemer med navnefortolkning og DNS. Sikkerhedskopieringen af den virtuelle maskine (VM) for nogle virtuelle maskiner mislykkes med en fejlmeddelelse om ugyldig navnefortolkning.

The File Level Restore (FLR) user account can install the FLR agent and browse most directories. The user account is not able to browse the /root directory from the NetWorker Management Console (NMC) recover wizard.

NetWorker VMware Protection (NVP) Virtual Machine (VM) backups fail in configuration using Direct Fiber Channel (DFC) with Data Domain error 5008.

NetWorker Virtual Edition (NVE) avi-webbrugergrænsefladen holder op med at reagere, ca. 83 % eller 85 %, når den opgraderes fra NVE.

The NetWorker VMware Protection integration is configured with the vProxy Appliance, and the nsrvproxy_mgmt command-line utility is being used to upgrade the existing appliances. The upgrade fails with an error.

The vCenter server account used by NetWorker keeps getting locked. The issue is tracked to login attempts from one NetWorker VMware Protection (NVP) vProxy appliance.

Upgrading to the latest vProxy version causes backups to fail with Error: "Failure," "Description": "Backup has failed: Unable to open session to target device \"DD_HOSTNAME\.""

Backups of large save sets intermittently fail when writing to Data Domain. The error observed is "5057-File handle is stale." This may be observed on various data types but is specific to large backups that span many hours.

Backups directed to the Data Domain fail when Retention Lock is enabled in the workflow action but is not configured on the target Data Domain device.

A NetWorker backup job fails because the selected protection group in the workflow does not have any enabled clients associated with it.

NetWorker Management Console 19.13.0.2 and Later Fails to Install or Upgrade on Windows system.

The NetWorker VMware Protection (NVP) vProxy appliance does not currently support the Trusted Platform Module (TPM).

NetWorker har ikke en vSphere Installation Bundle (VIB) til at åbne porte, der skal bruges til FLR på VMware ESXi-værter. RFE (Request For Enhancement) blev åbnet for dette.

The Instant Recover succeeds, but the Virtual Machine (VM) fails to boot with "Cannot open the disk /vmfs/volumes/<VOLUME_UUID>/<myvmname>/<myvmname>_1.vmdk' or one of the snapshot disks it depends on."

Gendannelse af afbildning af virtuel maskine mislykkes konsekvent ved hjælp af nyligt opgraderet vCenter. NetWorker vProxy Image Recover er holdt op med at fungere efter nylig vCenter-opgradering.

This KB provides an overview of the methods that can be used to identify the NetWorker software. The purpose of this KB is to assist NetWorker administrators and Customer Support Team (CST) with collecting information when opening a NetWorker Service Request (SR).

NetWorker VMware Protection (NVP) is configured to backup a VM which contains Independent disks. The backup completes successfully. VMs with a mixture of independent and dependent disks are reported as successful backups, but the independent disk was not backed up.

Webtjenesten Generic Services Toolkit (GST) viser forsinket initialisering og afsluttes derefter uventet efter en periode med kørsel uden nogen brugerinitieret handling.

A Virtual Machine (VM) FLR is attempted using the NetWorker VMware Protection (NVP) vProxy Solution. The vProxy FLR agent fails to install "Unable to transfer file vProxy-FLRAgent to VM"