NetWorker Module for Microsoft

Dette dokument fremhæver minimumversioner samt anbefalede og nyeste kodeversioner for Dell Technologies Enterprise- og Datacenterinfrastruktur-produkter. Vi evaluerer og overvåger omhyggeligt kodeimplementeringsdata for at sikre, at produktudgivelser lever op til vores strenge forventninger om at give vores kunder pålidelige produkter og løsninger.

Virtuel maskine (VM)-afbildning og øjeblikkelig gendannelse mislykkes med posten "Kunne ikke opdatere vmx-filens 'nvram'-post"

Du forsøger at udføre en virtuel maskine (VM) FLR af en Windows Server VM ved hjælp af NetWorker VMware Protection (NVP) vProxy-enheden. FLR-beslaget lykkes, men browserhandlingen mislykkes øjeblikkeligt, hvilket indikerer, at FLR-agenten ikke kan gennemse filer på systemet.

The NetWorker Management Console (NMC) software is updated on a Linux host. After performing the upgrade. The NMC's GST service is not starting up and reporting certificate validation errors.

NetWorker vProxy (NVP) Virtual Machine (VM) backups cancel with snapshot errors, reporting a failed digest operation; log shows corrupt digest metadata causing snapshot failure on Horizon clone VMs.

NetWorker is configured to perform Azure Virtual Machine (VM) snapshot backups. The backup policy fails, reporting "nsrazure_save: Command not found"

A NetWorker VMware Protection (NVP) Virtual Machine (VM) File Level Restore (FLR) fails to mount. Instant Access restore may also fail. The error logging returns that the vProxy failed to log in in to the Data Domain because the REST service on the Data Domain is disabled.

NetWorker-"regler" er konfigureret til at identificere VMware Virtual Machines (VM) i en NetWorker-beskyttelsesgruppe. Dette sikkerhedskopierer dynamisk nye VM'er baseret på de definerede regeldefinitioner og VM'er, der opfylder regelkriterierne. Der vises nogle eller ingen VM'er. Den tilgang, der er beskrevet i denne artikel, beskriver, hvordan du diagnosticerer potentielle konfigurationsproblemer, der resulterer i, at regler ikke identificerer forventede VMware-ressourcer korrekt.

Network Data Management Protocol (NDMP) incremental backups always promote to full because BASE_DATE = 0. Problem was caused by NSM for NAS client for the same NAS and saves set was running in parallel with the traditional NDMP backup client. Problem was resolved after removing the NSM for NAS client from the configuration.

NetWorker by default uses "SYSTEM@<NW-server-name>" as the sender in email notifications.

Virtual Machine (VM) FLR performed through the NetWorker VMware Protection (NVP) vProxy appliance fails with "cannot create handle .. the system cannot find the path specified" when the file path exceeds 260 characters.

NetWorker VMware Protection (NVP) vProxy redeployment fails because of a firewall port issue.

Package Manager (nsrpush) command fails to upgrade clients with NetWorker Modules installed. The nsrpush upgrade succeeds when performed from the NetWorker Management Console (NMC).

NetWorker Module for Microsoft (NMM) backups are configured for an Exchange server. The nsrnmmsv command fails reporting that it failed to start on the client.

NetWorker devices are in a write-protected (read-only) state. Backups or clone jobs writing to the "read-only" do not start or fail.

VM backups performed through the NetWorker VMware Protection (NVP) vProxy appliance fail stating "curl_easy_perform" returned error 28: "Operation timed out after 1,800,735 milliseconds with 0 out of -1 bytes received"

En sikkerhedskopiering af Microsoft SQL Virtual Machine (VM), der udføres ved hjælp af vProxy-enheden NetWorker VMware Protection (NVP), mislykkes. NetWorker-backuphandlingsloggen viser "Fejl modtaget fra vProxy ="-400: Anmodningen mangler VM-brugernavnet." "

NetWorker is configured on a Red Hat Pace Maker (pcs) cluster. The NetWorker server services fail to start with a connection error.

Der udføres en gendannelse fra NetWorker-brugersoftwaren. Når du forsøger at ændre gennemsynstiden, vises der en fejl, der angiver: "PM@#$%# er ikke en gyldig tidsbetegnelse i 12-timers format. Angiv AM eller PM"

A NetWorker server is configured with Simple Network Management Protocol (SNMP) traps using the nsrtrap command. The command is set on the backup action with "On Failure." After upgrading to 19.11.x from a previous release, the traps receiver only receives a nwServerNotification, the failedActionNotification is no longer received.

Alle sikkerhedskopieringer af NetWorker VMware Protection (NVP) Virtual Machine (VM) mislykkes. Jobbet rapporterer, at det certifikat, der bruges af vProxy, er forkert.

Ethvert gendannelsesforsøg foretaget ved hjælp af NetWorker Management Console (NMC) mislykkes med fejlen, mens sikkerhedskopieringer med denne vProxy-enhed fortsat fungerer som forventet.

Denne artikel indeholder instruktioner i, hvordan du aktiverer fejlfinding for REST (Representational State Transfer) API-kald (Application Programming Interface), der udføres i NetWorker.

In a Windows Cluster, NetWorker Client 19.9 or 19.8 floods daemon.raw with messages such as nsrpurge_adhoclog: get_lc_fspath_vhost_map: lg_getnameinfo failed vhost "cluster_name."

NetWorker Module for Microsoft (NMM) 19.9 Hyper-V incremental backup fails with error "Fails to retrieve information for virtual disk." This results in the incremental backup either promoted to full or fails.

NetWorker is upgraded to 19.13.0.0 or 19.13.0.1 from a prior release. The server is Windows based. The NetWorker Management Console (NMC) launches but crashes immediately after entering credentials.

A Linux server is configured as both the NetWorker server and NetWorker Management Console (NMC) server. The gstclreport command is used to generate NMC Reports from command line. This cases the NetWorker server daemon (nsrd) to crash with a core dump.

Linux NetWorker Server fails to start the authentication service with a permission denied error.

NetWorker VMware Protection (NVP) vProxy Virtual Machine (VM) backup workflows fail. The error observed in the workflow log reports: "Unable to start backup on vProxy 'vProxy_Name': Received an HTTP code: 500,"

In a Network Data Management Protocol (NDMP) backup, the job stops due to a SnapSure file system creation error. Causes include low NAS space, wrong file system name, SnapSure timeout, file system corruption.