PowerEdge R540

Denne artikel indeholder oplysninger om fejlen LIC008, der opstår ved import af IDRAC-licensen.

Denne artikel indeholder oplysninger om, hvordan du kontrollerer, om et netværkskort (NIC) er kompatibelt med en PowerEdge-server.

This article provides information about CPU Machine Check errors and common causes and proper handling when errors are seen.

Unsure about the procedure to update a specific component's firmware in a PowerEdge system? Learn how to in this specific article.

Dell Samsung PM893 SSD'er med firmware HJ55 eller tidligere oplever for tidlige SMART-fejl

New deployments of OpenManage Enterprise 4.4.0 are experiencing service failures after configuring the time zone for GMT +02:00 Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius. The issue is only seen on fresh deployment of OpenManage Enterprise (OME) 4.4.0 on Hyper-V. Deploying OpenManage Enterprise (OME) on other hypervisors is not impacted.

R7725, R6725, R7715 og R6715 antallet af CPU-kerner genkendes ikke korrekt.

PowerEdge: Dell service support for end of industry production of 2.5" 15k RPM SAS hard drives

Dell Technologies fraråder nedgradering af harddisk eller SSD-firmware, undtagen i validerede scenarier, på grund af uforudsigelige resultater og problemer med versionsrapportering.

Efter en genstart af systemet viser Integrated Dell Remote Access Controller (iDRAC) muligvis ikke oplysningerne om den virtuelle disk periodisk.

PowerEdge 15G-serveren reagerer ikke eller holder op med at reagere efter PST0210 begivenhed.

Brug af filteret 'Genstart påkrævet' og valg af alle elementer i denne filtrerede visning resulterer i, at jobbet "gør kompatibel" anvender alle ikke-kompatible firmwarekomponenter. En uventet genstart af destinationen ses, da komponenter, der kræver genstart, implementeres på målet. Problemet opstår kun, hvis du vælger alle objekter og bruger filteret 'Genstart påkrævet'. Alle andre filtre fungerer efter hensigten.

Performing a "yum update" check for Red Hat Enterprise Linux or SuSE Linux for Enterprise Servers updates may fail due to improper iDRAC RPM in the Dell YUM repository on linux.dell.com.

PowerEdge-servere går ned med fatale PCIe-fejl under opdatering af firmwaren til Kioxia CM6 NVMe-drev.

DSU and SUU may not inventory any server components due to a crash caused in the invcol.exe module. Inventory Collector 24.09 and newer is no longer fully compatible with Windows Server 2016.

CPU er kan opfattes som varme, mens serveren er inaktiv.

Various Dell enterprise products behave unexpectedly if IPMI is intentionally disabled from communicating between the operating system and iDRAC. This can be done by disabling the "In-band Management Interface" setting in BIOS System Security settings.

Dust or chemical contamination at the endface of a fiber optic LC connector or transceiver module impedes signaling. Dell engineering teams have verified cases in which a fully functional port appears to be a bad port because dirty optical connectors manifest as a port failing loop testing with acceptable power measurement levels. Cable connectors should be cleaned and when stored must be protected from dust particle or chemical contamination.

Observation af systemet holder op med at reagere eller Purple Screen Of Death (PSOD) under ESXi 8.0 U3-installation,

iDRAC Service Module (iSM) 5.4 and older versions fail to upload SupportAssist collections back to Dell. A "handshake API" error occurs. This upload feature has been deprecated due to the receiving servers at Dell had been decommissioned.

Denne artikel hjælper med at finde og downloade de ældre versioner af Dells tilpassede ISO'er til ESXI på Dells supportwebsted.

Dette er den nyeste version af Dell OpenManage Enterprise 4.3.x Support Matrix.

The Dell SS540 SAS solid state drive is reported as not correctly functioning.

PowerEdge servers with Emulex Fiber Channel (FC) driver version 12.01.12 may fail driver installation under Windows Defender Application Control (WDAC) Enforced Mode on Windows Server.

PowerEdge: Broadcom NXE devices with Driver 229.2.73 (SWB: Y7T4X) may report that the interfaces are missing in the operating system when secure boot is enabled.

I nogle tilfælde kan firmwareopdateringsjobbet muligvis ikke startes, når der udføres en firmwareopdatering via tilgængelige iDRAC-grænseflader.

This article provides a step-by-step guide on how to remove and install a cooling fan on a Dell system. These instructions are applicable to both standard and high-performance fans. The guide covers the removal and installation of the cooling fan assembly.

In Windows Server 2025, when leveraging CPUs with more than 256 cores, the Broadcom BCM5720 fails to retrieve a DHCP address, leading to no network connectivity.

OpenManage Enterprise integration for VMware vCenter may fail to Unmanage hosts with error "UNMANAGE_REMOVE_MEL_FAILURE"

When a PS1010 or PS1030 NVMe SSD is installed, a PSOD may occur during production or gathering Operating System (OS) logs.