PowerEdge XE9680

Denne artikel indeholder vejledning til Dell System Update (DSU).

Denne artikel forklarer, hvordan du opretter og importerer et iDRAC-certifikat.

Dette dokument fremhæver minimumversioner og anbefalede og nyeste kodeversioner for Dell Technologies PowerEdge-produkter. Vi evaluerer og overvåger omhyggeligt kodeimplementeringsdata for at sikre, at produktudgivelser lever op til vores strenge forventninger om at give vores kunder pålidelige produkter og løsninger.

Der er ikke angivet nogen harddiske under PowerEdge RAID-controlleren (PERC) H965-kabinettet efter opgradering af PERC-controllerens firmware til 8.4.0.0.18-27 med OpenManage Server Administrator (OMSA) 11.0.0.X.

This article talks about the PERC H965 controller's supported virtual disk stripe sizes.

PowerEdge 17th Generation Servers with Delta Power Supplies may not show correctly in iDRAC UI and SEL logging after AC cycle.

Denne artikel indeholder trin til fejlfinding af en meddelelse om kabinetindtrængen og åben kabinet for PowerEdge-servere.

This article provides guidance for Dell PowerEdge servers requiring remediation for the Microsoft Secure Boot certificate expiration (June 2026). It applies to UEFI-based systems with Secure Boot enabled and older Secure Boot certificates affected by the Microsoft Secure Boot certificate expiration (June 2026). The operating system primarily manages Secure Boot certificate updates, and customers should ensure they update their systems using supported Microsoft update mechanisms. It applies to Windows Server operating systems affected by this change, as defined by Microsoft, running on physical systems with customer-managed firmware and Secure Boot configuration. It does not apply to cloud platforms or appliances where the provider manages firmware and Secure Boot keys, such as Microsoft Azure, AX, or APEX-Managed Cloud. Systems already running BIOS versions that include the updated Secure Boot certificates may not require this procedure.

Dell PowerEdge-servere med komponenter med et fælles design er grupperet i generationer, f.eks. PowerEdge 17. generations servere, 16. generation, 15. generation eller 14. generation. Denne artikel indeholder generelle retningslinjer for navngivningskonventionen for PowerEdge-servermodeller med henblik på at identificere generation og almindelige komponenter. Denne artikel indeholder også en liste over alle PowerEdge-servere efter model, herunder type, CPU, generation og fjernadministrationskomponenter.

Denne artikel forklarer, hvad diskfejl PDR1001 og PDR3 betyder på Dell PowerEdge-servere, og de bedste fremgangsmåder til at løse disse problemer. Ved at forstå disse advarsler og handle hurtigt kan du bevare lagerets tilstand, forhindre nedetid og beskytte kritiske data.

This article provides information about exporting the Tech Support Report (TSR) / SupportAssist Collection, including the Operating System, Application Data, and the RAID controller log. This is done using the integrated Dell Remote Access Controller (iDRAC) command-line interface (CLI) of Dell PowerEdge servers generations 12, 13, and 14.

Denne artikel indeholder oplysninger om, hvordan du konfigurerer Emulex LPe31002 HBA-linkhastighed i UEFI eller Human Interface Infrastructure (HII).

Denne artikel indeholder tre metoder til at bekræfte identifikation af SSD-dele (PPID)

Ændringer i BIOS-indstillinger vises muligvis ikke i iDRAC, hvis de er konfigureret ved hjælp af F11 Boot Manager på Dell PowerEdge 16G- og 17G-platforme.

Nedenstående artikel indeholder en midlertidig mekanisme til gendannelse af PowerEdge-systemer fra den vigtige logpost "SWC5008 kan ikke få adgang til det forreste LED-panel pga. en hardwarefejltilstand" for nogle få versioner af iDRAC.

NVIDIA has updated the signing certificate for its UEFI network driver from Microsoft UEFI CA 2011 to Microsoft UEFI CA 2023. PowerEdge 17G platforms already trust the CA 2023 certificate, but 15G/16G and earlier servers require a BIOS update released in December 2025. Systems without this updated certificate support may fail to initialize the NIC UEFI driver when Secure Boot is enabled.

PowerEdge servers do not support operating system installation, or boot from direct CPU‑attached NVMe SSD drives if the metadata format size is not set to 0.

PowerEdge connected Dell NVMe SSDs with the Limited Retry (LR) bit set may experience an increase in failures due to elevated media and data‑integrity error rates.

PowerEdge-systemer logger muligvis ikke altid nedgraderede PCIe-links i livscyklus (LC) eller systemhændelseslogfiler (SEL).

Encountering PR8 errors in the LifeCycle (LC) log when using a BlueField-3 (BF3) Data Processing Units (DPU) card (DPN: HFWRM).

On 16G PowerEdge XE systems, the PCIe addresses of some devices may change after a BIOS update.

Vejledning i, hvordan du bruger iDRAC Direct-funktionen på PowerEdge XE9780-systemet.

Dell Micron 7450 and 7500 Non-Volatile Memory Express solid state drives may encounter drive initialization failure due to a firmware issue, resulting in the solid state drives being unrecoverable.

Denne artikel indeholder oplysninger om fejlen LIC008, der opstår ved import af IDRAC-licensen.

This article provides information about CPU Machine Check errors and common causes and proper handling when errors are seen.

When encryption is enabled on BOSS-N1, the system may stop during POST with the message: "No Boot Device Available or Operating System Detected."

This article provides information about a condition in which the server fans spin at 100% with NVIDIA A100 GPUs installed after updating the IDRAC firmware.

Unsure about the procedure to update a specific component's firmware in a PowerEdge system? Learn how to in this specific article.

PowerEdge XE Systems using NVIDIA A100 GPUs may experience boot failure or kernel panic after enabling MIG with driver 570.86.15 or 570.124.06.

Nvidia-smi output for NVIDIA H100 graphics processing unit (GPU) may report an incorrect value for the aggregate static random-access memory (SRAM) correctable counter.