PowerFlex custom node

Denne artikel indeholder links til dokumentation vedrørende PowerFlex Rack, PowerFlex Appliance, PowerFlex Custom Node, VxFlex Ready Node, PowerFlex-software, PowerFlex til AWS, PowerFlex til Azure og CloudLink.

Dell har et CRU-program (Customer Replaceable Unit) til mange af vores hardwaresystemer. CRU-programmet giver kunderne mulighed for at udskifte udvalgte hardwaredele. Du kan se en liste over de hardwarekomponenter, der er angivet som CRU for et specifikt hardwaresystem, på siden Dell-garanti og -vedligeholdelse.

The RestAPI call to switch MDM ownership through the Gateway fails with a timeout.

Dell Storage Simple Support Matrices on E-Lab Navigator provide the optimal interoperability for your storage solution.

Event-History pod will go in Crashbackoffloop in case where it is unable to connect to active-mq-activemq-postgres pods.

Dell PowerFlex remediation is available for the Apache Log4j Remote Code Execution Vulnerability that may be exploited by malicious users to compromise the affected system. Dell recommends implementing this remediation as soon as possible in light of the critical severity of the vulnerability.

PowerFlex Manager UI becomes inaccessible.

PowerFlex Manager Platform UI login failure - "Failure to initialize," "User has no permissions to view this page"

PowerFlex Manager generates a 2-year default self-signed SSL certificate when it is deployed. You can replace this default SSL certificate by generating a CSR, having it signed by a trusted certificate authority and uploading the signed certificate to PowerFlex Manager. If you are not using a trusted certificate authority and must renew the default self-signed SSL certificate, then you can use the following instructions.

Kan ikke ændre adgangskoden til nodeoperativsystemet ved hjælp af PowerFlex Manager med fejl VXFM00685. Når du har ændret en adgangskode i PowerFlex Manager-brugergrænsefladen for node, viser fejlene fejl.

Diskenheder, der er tilsluttet eller konfigureret til SVM- eller SDS-noder, mangler serienummeroplysninger og er ikke angivet i mappen /dev/disk/by-id.

Kan ikke opgradere switchens operativsystem ved hjælp af PFxM.

Kan ikke fuldføre guiden Tilføj eksisterende ressourcegruppe for et PowerFlex MDS-system.

Efter vellykket PFMP-opgradering har CloudLink (CL)-agenterne dublerede poster i en tilsluttet og frakoblet tilstand.

4.x PFxM-brugergrænsefladen indlæses ikke, fordi PowerFlex-administrationsplatformens "PFMP"-pod SDNAS-gateway ikke er i en sund tilstand.

I PFxM-brugergrænsefladen er der en advarsel om, at hændelser fra MDM ikke hentes.

Denne Knowledge Base-artikel (KBA) beskriver forskellige metoder til at identificere versioner i PowerFlex-serien, herunder PowerFlex-løsninger og kun software.

Denne artikel indeholder links til teknisk dokumentation til brugerdefinerede PowerFlex-noder.

Fjern og tilføj en ressourcegruppe igen.

14‑gen Ready Nodes with ≥12 DIMMs can reboot, recorded in iDRAC as a BP1 power‑good voltage out‑of‑range error; signal noise on the backplane power cable creates loss alerts, risking data loss.

Flere storagenoder til PowerFlex-rack eller -enheder rapporterer om et forringet batteri. iDRAC viser fejlen "NVDIMM-batteriet er ikke klar, enten fordi batteriet ikke er fuldt opladet eller en forbigående batterihændelse."

The "Software Serial ID" or "SWID" (usually starts wit ELMSIO....) is used to open Service Request for PowerFlex, and to start software renewal process. If the Software Serial ID is not available, you can also create cases using the "System Serial number" (usually starts with "ELMVX....)

The following procedure explains how to manually install an external SDC on a Debian-based server. The steps in the procedure below are relevant for Debian/Ubuntu operating systems, including Proxmox Virtual Environment.

PowerFlex Manager rapporterer en falsk advarsel vedrørende "STORAGE_POOL_UNBALANCED", NOT_ENOUGH_FAULT_UNITS_IN_SP" og "CONFIGURED_SPARE_CAPACITY_SMALLER_THAN_LARGEST_FAULT_UNIT".

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

Flere pods bliver ved med at genstarte under og efter en ny implementering eller opgradering til 4.6.1 (Storage Only (SO) og CO (Compute Only (CO) Resource Group (RG).

Denne artikel beskriver, hvordan du bruger den interne HTTP-deling til 4.x PowerFlex Manager Release Certification Matrix (RCM), Intelligent Catalog (IC), ISO-uploads.

This Article explains the details of an MDM cluster in a PowerFlex solution.

Slow, non‑SSD storage on the cluster VMs leads to etcd latency over one second, triggering repeated pod restarts, node NotReady states and loss of PowerFlex Management Platform (PFMP) UI access.

Offline upgrade of PowerFlex Manager How to manually upgrade PowerFlex Manager without Secure Remote Services.