PowerStore 3200T

Liste over tekniske informationsressourcer, f.eks. vejledninger, tjekliste, simpel supportmatrix og instruktionsvideoer, der kan hjælpe med implementering og brug af PowerStore.

Dette dokument fremhæver minimumversioner samt anbefalede og nyeste kodeversioner for Dell Technologies Enterprise- og datacenterinfrastrukturprodukter. Dell evaluerer og overvåger omhyggeligt kodeimplementeringsdata for at sikre, at produktudgivelser lever op til vores strenge forventninger om at give vores kunder pålidelige produkter og løsninger.

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

This article provides an introduction to the PowerStore REST API, including practical usage examples and common errors.

Security scans may report several issues if the PowerStore appliance does not have a Certificate Authority signed server certificate present.

I denne artikel beskrives advarsler vedrørende WPM (Write Protect Mode - fuld kapacitet).

Denne artikel beskriver eventuelle fejl, der er observeret under den første konfiguration og klyngeinddeling af en PowerStore-enhed. Dette omfatter almindelige årsager, vCenter-tilladelser, licensering, netværksopsætning og portkrav.

This article details the cause of the error "iSCSI login failure."

This article details the issue and resolution to the error "Destination device not found, retry" found while importing to Linux hosts.

Version 3.x introduces a feature that synchronizes the version of any added 3.x appliance with the cluster. The synchronization process requires copying the cluster OS version to the appliance, and performing a factory reset. Synchronizing the Appliance version to the Cluster version is a two-step process: 1. Start the "Add Appliance" wizard and synchronize the appliance version to that of the Cluster using SYNCHRONIZE 2. When SYNCHRONIZE has finished, start the "Add Appliance" wizard again and add the appliance to the cluster.

PowerStore-opgradering (NDU) til 3.2.x fuldført, men konfiguration af klynge mislykkedes, fordi kommandoer ikke kunne udføres efter opgraderingen. GUI viser: Opgraderingen lykkedes. Kunne ikke udføre kommandoer efter opgradering: Opgradering til DNA mislykkedes. Opgave: Opgrader masterenheden. Reason: Opgradering til DNA mislykkedes. Opgave: opgradering af pacemaker. Årsag: com.emc.bedrock.core.exceptions.ServiceMessageException (0xE04030010046)

If Hosts generate large numbers of ABORT TASK requests to the PowerStore appliance, it can lead to an unexpected Node reboot.

Node reboot or panic due to NAS out of memory (OOM) condition

Denne artikel beskriver en fejl under forsøg på at installere Dell Witness 1.0.0-10-pakken i Red Hat Linux.

This alert indicates that a hotfix could not be applied during node reimage because an NDU upgrade is in-progress, and the hotfix software slot is occupied by the pre-staged OS upgrade package. If the upgrade completes successfully, no action is needed. If the upgrade is rolled back, the hotfix must be re-applied.

Af og til skal der tilføjes helbredstjek, efter PowerStoreOS er udgivet. Disse helbredstjek leveres af den tynde pakkemekanisme og identificerer forskellige kendte problemer i PowerStore-klyngen.

These alerts indicate that NAS server network interfaces per appliance on PowerStore have exceeded the major (90%) or critical (99%) threshold of the maximum allowed limit. Delete unused or unnecessary NAS server network interfaces to reduce the count below the threshold and prevent creation restrictions.

I denne artikel beskrives PowerStore-advarslen "Der blev fundet forældreløse snapshots".

These alerts indicate that NAS server network interfaces per NAS server on PowerStore have exceeded the major (90%) or critical (98%) threshold of the maximum allowed limit. Delete unused or unnecessary NAS server network interfaces to reduce the count below the threshold and prevent creation restrictions.

Denne artikel omhandler advarsler om lokal diskslid i PowerStore.

This knowledge base article addresses PowerStore interconnect module compatibility alerts that occur when installed modules do not meet system requirements.

This knowledge base article addresses PowerStore interconnect module FRU state alerts that occur when an interconnect module has experienced a hardware failure or has lost its connection to the PowerStore cluster.

This article discusses Faulty Cache alerts.

This article discusses the Left Control Panel failure alert

This knowledge base article addresses the alert indicating that an interconnect module's power status is off.

This knowledge base article addresses two interconnect module link alerts: link down and link speed degradation. The alerts indicate an interconnect module's physical link has failed or is operating at reduced speed.

PowerStore Alerts: Drive Encryption Alerts

I dette dokument beskrives de problemer, der er løst i patchversionerne af PowerStoreOS.

This is a landing page that contains links to Information and resolution steps for common pre-upgrade health check (PUHC) failures. These are considered self-service solutions and may not need support engagement.

This health check validates that the configured NVMe/TCP I/O queue count is within the recommended limit for upgrade readiness. The check compares the current NVMe/TCP I/O queue count against the recommended maximum of 25,000 queues.