Dell EMC Unity 350F

Hvis der bruges inkonsistente indstillinger for blokstørrelse i 2-vejs NDMP-dataoverførselsstien, fungerer NDMP-sikkerhedskopieringen ikke, og de bånd, der bruges under sikkerhedskopieringen, kan blive markeret som fuldt for tidligt. Det er blevet observeret, at NDMP-sikkerhedskopieringen starter, men den bånd, der er indlæst i drevet, markeres med det samme, selvom der er plads tilbage på båndet.

Dette dokument fremhæver minimumversioner samt anbefalede og nyeste kodeversioner for Dell Technologies Enterprise- og Datacenterinfrastruktur-produkter. Vi evaluerer og overvåger omhyggeligt kodeimplementeringsdata for at sikre, at produktudgivelser lever op til vores strenge forventninger om at give vores kunder pålidelige produkter og løsninger.

This article explains how to address or order a failed drive in a Dell Unity system for SymptomCode: Neo14:60258 (User Correctable)

The Unity Upgrade Wizard fails and reports the following error: "The system encountered an unexpected error while upgrading the software. Reboot your Primary storage processor and try upgrading again. Check System > Logs for related messages. (Error Code: 0x6000cb9)"

Denne artikel diskuterer, om Unity er modtagelig for CVE-2026-20833.

This KB explains how to handle situations where the hostname or friendly name of Unity is not updated on the syslog server.

This article explains Dell guidelines on company administrator assignment.

This article explains how to assign an Initial Company Administrator.

This article explains how to promote Company Administrators.

Unity Unisphere kan ikke oprette forbindelse ved hjælp af Secure Connect Gateway (SCG) (kan rettes af brugeren).

This article helps users safely manage storage by outlining key considerations before deleting snapshots in Dell Unity systems. (User Correctable)

Joining Active Directory (AD) fails with error: Miscellaneous failure ASN.1 failed call to system time library. (User Correctable)

Gentagen advarsel vises i Unisphere, når pODFU (Periodic Online Drive Firmware Update) er aktiveret. (Kan rettes af brugeren)

The Serial Number for the new DPE may change to a temporary serial number after replacing the Unity Disk Processor Enclosure (DPE).

Omfattende meddelelser om "Ugyldige tidligere omkostninger" i systemloggene i Storage Center, og enheder, som bruger deduplikering eller komprimering, har ikke databevægelse til det ønskede sted, efter at du har foretaget ændring af en lagringsprofil.

Denne KB skal hjælpe med at løse fejlen. Fejlkode:0x6500136

This article displays a list of Dell Software Products and related articles on how to obtain the Software Unique ID (SWUID) for each specific product. The SWUID is required for streamlining the processes related to both the Software License Renewal process and opening a Support Case.

There is a change in SNMP Trap notification behavior after the Unity OE 5.2 upgrade. Before the upgrade, the system sent an SNMP alert for all configured events as often as they occurred. After the upgrade to OE 5.2 or later, only five SNMP alerts for the same event are sent within a 24-hour window.

Unisphere UI fails to log in as LDAP User when TLS1.0 is disabled with message "The logged in user is not authorized to access Unisphere."

Unable to configure LDAP and LDAPS -- connection verification fails.

Adding NTP server fails with "Cannot create NTP servers. At least one of the specified NTP servers is not working (Error Code:0x6000840).

Information about customer replaceable unit (CRU) videos for Dell Technologies VxFlex Ready node products

This article contains information about customer replaceable unit (CRU) videos for Dell Technologies VNX and VNXe products.

Information about customer replaceable unit (CRU) videos for Dell Technologies PowerProtect and Data domain products

Information about customer replaceable unit (CRU) videos for Dell Technologies Powerflex products

Information about customer replaceable unit (CRU) videos for Dell Technologies ECS products

Information about customer replaceable unit (CRU) videos for Dell Technologies Unity products

Information about customer replaceable unit (CRU) videos for Dell Technologies Connectrix products

Dust or chemical contamination at the endface of a fiber optic LC connector or transceiver module impedes signaling. Dell engineering teams have verified cases in which a fully functional port appears to be a bad port because dirty optical connectors manifest as a port failing loop testing with acceptable power measurement levels. Cable connectors should be cleaned and when stored must be protected from dust particle or chemical contamination.

The I/O module is powered off. Try rebooting the Storage Processor (SP). If the I/O module remains powered off after a reboot, you may have to replace the I/O module. (Dell Correctable)