VMWare Cloud on Dell EMC VxRail E560F

Dette dokument fremhæver minimumversioner samt anbefalede og nyeste kodeversioner for Dell Technologies Enterprise- og Datacenterinfrastruktur-produkter. Vi evaluerer og overvåger omhyggeligt kodeimplementeringsdata for at sikre, at produktudgivelser lever op til vores strenge forventninger om at give vores kunder pålidelige produkter og løsninger.

Denne artikel indeholder metoderne til at få vist status for strømforsyningsenheden (PSU) via VxRail Manager, vCenter eller iDRAC og via CLI (Command-Line Interface) for at afgøre, om din Dell VxRail-PSU skal udskiftes.

vSphere Configuration Profiles are not supported on VxRail nor VCF on VxRail.

NSX upgrades initiated from SDDC Manager may fail during the upgrade pre‑check with errors indicating that NSX is not properly connected to compute managers or transport nodes.

One or more VxRail Manager checks returns event code 1 or 2, representing yellow or red alerts, respectively. These must be investigated prior to upgrading the cluster.

How to disable remote connectivity

Opstart af en VM mislykkedes med "Enheden "hpet0" understøttes ikke af den aktuelle hardwareversion", og modulet "DevicePowerOnEarly" tændes mislykkedes.

ESXi viser frakobling i NSX-T-controllerplanet.

Hyppige afbrydelser af filserveren rapporteres på vCenter, og brugere kan ikke få adgang til filserveren under afbrydelserne.

Node expansion validation is failing with error "'HttpStatus' object has no attribute 'strip'" due to special characters in the vDS name.

Dell EMC VxRail: Dial-home event code: VXR230011-Node {0} upgrade operation failed

Enhanced Network Stack (ENS) is disabled on X710 Network Interface Cards (NIC) after upgrade to 7.0.300.

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

vSAN-tilstandskontrol viser en advarsel om overholdelse af storagepolitik.

vSAN device encounters a permanent error when devices are not readable or writable.

The intent of this article is to provide the proper course of action to take in case the notified mystic code MYSTIC014088, VXR014088 takes place.

Oplysninger om, hvordan du opgraderer en Horizon View-klynge (VDI).

Hosts are failing to show in the plugin and VxVerify due to incorrect values in the node.node table.

Node add is failing with error in UI "Starting platform service…"

Der opstod en fejl under konfiguration af udvidet klynge: Vidnevært allerede konfigureret i udvidet klynge

"esx_vers"-tilstandstjekket analyserer ESXi-nodedataene for uoverensstemmelser.

One or more VxRail Manager checks returns event code 1 or 2, representing yellow or red alerts, respectively. These must be investigated prior to upgrading the cluster.

Hændelse VXR508SEKM0216 Handlingen SEKM-aktivering kunne ikke fuldføres, fordi SEKM-funktionen allerede er aktiveret.

Virtuelle maskiner (VM) kan ikke startes efter tilføjelse eller fjernelse af netværkskort (NIC er) på grund af ændring af startrækkefølgen, når netværkskort tilføjes eller fjernes.

How to flush vCenter Domain Name System(DNS) cache.

Denne artikel forklarer, hvordan man løser en situation, hvor siden med adgangsnøglen ikke vises i VxRail-support-plug-in'et.

Dell VxRail remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

Dell VxRail remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

VxRail: Ikke tilgængelig for at hente klyngeudrulningstype.

How to enable and disable UEFI Secure Boot on VxRail.