Connectrix DS-6520B

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Data Center Infrastructure products. Dell carefully evaluates and monitors code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

This KB provides steps to replace zone member.

Information about customer replaceable unit (CRU) videos for Dell Technologies VxFlex Ready node products

This article contains information about customer replaceable unit (CRU) videos for Dell Technologies VNX and VNXe products.

Information about customer replaceable unit (CRU) videos for Dell Technologies PowerProtect and Data domain products

Information about customer replaceable unit (CRU) videos for Dell Technologies Powerflex products

Information about customer replaceable unit (CRU) videos for Dell Technologies ECS products

Information about customer replaceable unit (CRU) videos for Dell Technologies Connectrix products

Procedure to customize the chassis name.

Unable to import MAPS policy using BNA on SAN switch.

How to recover a slot from a EM-1045, CHASSIS, WARNING, Slot XX is being powered OFF (not enough power) message?

After upgrading to Fabric OS (FOS) 9.1.1c, unable to run inline commands from UNIX or Linux server to the switch with the "fosexec" commands.

A slow blinking amber light showing internally from the switch model DS6620B-V2, not from the switch panel, is confirmed by Brocade to be the LED from the eUSB card (on the motherboard).

Learn how to use PuTTY for SSH key-based authentication. Step-by-step instructions to create SSH keys, add SSH key to PuTTY, and connect with SSH key securely on Connectrix B-Series.

This KB provides steps to rename a zone object. You can use these steps for all zone object types, including cfgs, zones, and aliases.

Post performing hareboot or hafailover, switch was showing error "Switch is not in ready state. Switch enable failed. switch status = 0x4". Switch was in Disabled state.

The seccermgmt cert shows error "Is an unknown x509 format."

Connectrix B-Series FOS compatibility check with SMI-S Agents

Configupload output automatically generated with switch name suffix rather than the file name provided by the user.

When the active ports have exhausted the current POD license pool, additional ports will not be assigned a license. In such cases, manually move licenses from unused ports by releasing the POD assignment to a newly used port and reserve it. FOS 9.x and above

This issue is seen while the backed-up switch configuration has been loaded to the switch using the configdownload command.

AES256-SHA256 (0x3d) and AES128-SHA256 (0x3c) is blocked for TLS.

Fabric OS 9.1.0 introduces the Fibre Channel Link Aggregation (FC-LAG) feature to provide FC-LAG capability between Brocade switches and Cisco UCS FIs that are configured in end-host mode.

Switch policy status is critical due to WWN_DOWN.

OpenSSH public key authentication provides password-less logins, known as SSH authentication that uses public and private key pairs for incoming authentication. Any admin user can perform incoming Open SSH public key authentication.

DCX8510-8B rebooted with error "Processor rebooted - Reset"

wwpn of the connected device is not displayed correctly showing 0s.

How to disable the ISLs if no longer required

Learn how the MyService360 services analytics dashboard integrates the Dell AIOps (formerly CloudIQ) Health Score into the Install Base views. This integration streamlines services and product health management by IT admins using the MyService360 and Dell AIOps portals. Verify supported products by portal and access helpful Dell AIOps resources.

Unable to add LUNs beyond the current 256 on servers within the UCS Domain.