Skip to main content
Emulex Family of Adapters image

Emulex Family of Adapters

Emulex Family of Adapters

Articles

Invalid entry. Please use only Letters, numbers and any special characters except <>)(%/;,=#-/*

15 out of 15 shown

This article provides information about how to verify if a Network Interface Card (NIC) is compatible with a PowerEdge Server.
Updated:  January 23, 2026 ID: 000349619

The article describes how to troubleshoot network connectivity issues for network cards.
Updated:  August 20, 2025 ID: 000227983

ESXi 6.7 servers with Emulex fibre channel HBAs are not able to access LUNs on Dell EMC PowerMax storage after installing lpfc driver version 12.8.317.0.
Updated:  January 22, 2026 ID: 000189608

Linux-based Dell Update Packages (DUPs) for Intel Network cards on firmware family 24.0.0 may display the message "Requires Power Cycle for activating the updated firmware".
Updated:  November 20, 2025 ID: 000388255

New hosts running latest ESX Emulex FC driver for Emulex HBA model numbers: LPe31000, LPe32000, LPe3500x, LPe3600x are reporting LPFC FCP errors when added to the Unity array.
Updated:  October 16, 2025 ID: 000196094

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.
Updated:  July 31, 2025 ID: 000132371

This is seen when using direct attached storage with an Emulex LPe35002-M2-D and Red Hat Enterprise Linux, the server fails to boot.
Updated:  July 09, 2025 ID: 000226962

PowerEdge servers with Emulex Fiber Channel (FC) driver version 12.01.12 may fail driver installation under Windows Defender Application Control (WDAC) Enforced Mode on Windows Server.
Updated:  June 05, 2025 ID: 000236792

Microsoft Hyper-V Virtual Machine (VM) Live Migration may fail or no LUNs are mapped after powering on VMs due to Windows architecture and hardware configuration limiting the number of vFC LUNs.
Updated:  May 01, 2025 ID: 000223671

After upgrading FW 16.35.30.06 for Dell OEM Mellanox CX5 adapters, "Interface Type" in iDrac GUI shows "Not Supported" instead of actual medium like "Optical Fiber".
Updated:  April 29, 2025 ID: 000306143

Firmware updates using the iDRAC or LifeCycle Controller does not work on any Emulex 8 Gb fiber channel adapter.
Updated:  February 05, 2025 ID: 000144615

Network port enumeration on Windows Server 2022 with Dell network adapters may swap port designations.
Updated:  January 13, 2025 ID: 000221408

DELL OEM Emulex LPE12002 FC8 HBAs are not detected after upgrading from ESXi 6.7 to 7.0.
Updated:  December 18, 2024 ID: 000211201

After a user updates to ESXi 7.0.3 (update 3) or later versions, VMware ESXi hypervisor may detect Emulex Fibre Channel Host Bus Adapter (FC HBA) devices twice in the storage core adapter list and assigns two different HBA names to the same UID.
Updated:  December 11, 2024 ID: 000204292

What is a common Network Partition and Teaming Mode mistake that may result in unexpected network issues.
Updated:  December 11, 2024 ID: 000179202