VxRail Software

Questo documento evidenzia le versioni minime, consigliate e più recenti del codice per i prodotti Dell Technologies Enterprise e Data Center Infrastructure. Dell valuta e monitora attentamente i dati di implementazione del codice per garantire che le versioni dei prodotti soddisfino le nostre rigorose aspettative di fornire ai nostri clienti prodotti e soluzioni affidabili.

Guida per i clienti Dell su come prepararsi a un aggiornamento del VxRail Cluster con il team Remote Proactive Support.

Dell VxRail: Support Matrix per Secure Remote Services (SRS) e Gateway con connessione sicura (SCG).

Codice evento: VXR508PWR2260 Questo codice evento indica che Intel Management Engine non risponde e lo stato Thermal FailSafe del server è attivato.

Lo scopo di questo articolo della Knowledge Base è quello di fornire la linea di azione corretta da intraprendere quando si verifica il codice mistico notificato MYSTIC014062/VXR014062.

VxRail: impossibile configurare SNMPv3 su vCenter.

Event code: VXR508PDR60 This event code indicates "Error occurred on <physical disk> : <error code>."

Event code: VXR508PWR1004 This event code indicates "The system performance degraded because power capacity has changed."

Event code: VXR508TMP0126 This event code indicates "Disk drive bay temperature is greater than the upper warning threshold."

Event code: VXR508PDR1103 This event code indicates "Drive <number> is the hot-spare drive."

Event code: VXR508PDR217 This event code indicates "Unable to complete the Cryptographic erase operation on the physical disk drive <drive name>."

Event code: VXR508PDR1104 This event code indicates "Consistency check is in progress for drive <number>."

Event code: VXR508PSU0007 This event code indicates "Power supply <number> is operating at 110 volts, and could cause a circuit breaker fault."

Event code: VXR508PSU8502 This event code indicates "The PSU in slot <slot number> detected 110 VAC input voltage and does not match chassis configuration."

Event code: VXR508PDR1108 This event code indicates "Rebuild was aborted for drive <number>."

Event code: VXR508PSU102 This event code indicates "Power supply <power supply unit> status is unknown."

Event code: VXR508PCI5009 This event code indicates "The PCIe adapter in the PCIe slot<PCIe slot number> was removed from the slot while the server<server slot number> was turned-on."

Event code: VXR508PDR1003 This event code indicates "Drive <number> in disk drive bay <bay> is the hot-spare drive."

Event code: VXR508PST0080 This event code indicates "An issue was detected. System at boot F1/F2 prompt. Requires entry to continue."

Event code: VXR508PDR9000 This event code indicates "Foreign Configuration was detected on <physical disk drive name>."

Event code: VXR508PDR206 This event code indicates "<physical disk name> is a solid state drive (SSD) that is not supported by the controller."

Event code: VXR508PDR114 This event code indicates "The <PCIe solid state device name> is approaching read-only mode."

Supporta il nuovo monitor eventi iDRAC: SEKM065 Dell EMC VxRail: evento VXR508SEKM065 iDRAC non è in grado di cambiare la modalità di sicurezza PERC del dispositivo <deviceName> da Local Key Management (LKM) a Secure Enterprise Key Manager (SEKM).

Controllo preliminare dell'aggiornamento del cluster VxRM per assicurarsi che il cluster non disponga di un certificato autofirmato quando vLCM è abilitato.

Guida utente di VxRail Troubleshooting Toolbox (VTT)

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

Codice evento: VXR508PSU8506 Questo codice evento indica "Unable to change power cap because Server Based Power Management Mode is enabled".

Codice evento: VXR508PWR2254 Questo codice evento indica che l'utilizzo di 110V non è riconosciuto e lo chassis non può concedere l'autorizzazione Power On al server.

Codice evento: VXR508PWR204 Questo codice evento indica che il valore dell'oggetto è stato modificato correttamente. La modalità di risparmio energetico massimo disattiverà la funzione Extended Power Performance.

Codice evento: VXR508PSU8508 Questo codice evento indica "<error string>PSU<slot number> L'aggiornamento del firmware è in corso."