Knowledge Base

Computer Does not Turn on or go Into Windows

This article will help determine why the computer is not powering on, not displaying video or is getting stuck at the Dell logo screen or otherwise failing to boot all the way into the operating system.

Plese find below informative videos which may assist you with this issue or alternatively, go straight to our Table of Contents for detailed information.

Video (English Only) - My Dell in 99 seconds: Can't turn on your laptop?

Click here to view the video directly.

Video (English Only) - Power issues on Desktop computers

Click here to view the video directly.

Table of Contents

Your computer can be non responsive because of one of the following reasons:

No Power

Computers have a power indicator that glows when it is receiving power. On Desktops the front panel of the computer case has LED near the power button. Try the following steps to resolve a desktop no-powering situation:

  • Try a different wall outlet, and power it on
  • Reseat the power cord which is connected to "Power Supply" of the tower and power the Desktop on
  • Swap the power cord of the Monitor with the system power cord and power on the Desktop

On Notebooks this indicator may be a lighted power button or it may be an LED located at the upper part of the keyboard or along the front edge of the computer itself.

Try the following steps to resolve a notebook no-powering situation:

  • Ensure that the battery is fully charged
  • Remove the Battery and disconnect the AC Adapter; Hold the power button down for 5 seconds to discharge "Static Flea Power"
  • Reseat the battery on the Notebook and power it on
  • Remove the Battery from the Notebook and power it on using only the AC Adapter
  • Ensure that the Power LED on the AC Adapter is lit to ensure the functionality of the AC Adapter, also try another working AC Adapter if available.
Back to Top


The term POST refers to Power-On Self-Test which is a series of checks the computer goes through whenever it starts. If the computer fails any of these tests, it will stop the start-up process.

Indications of a failed POST include:

  • If the computer is displaying the Dell logo and does not move past that point, it has probably failed POST.
  • If the power indicator lights up and it is amber or orange, this is usually an indicator that it has failed POST.
  • If you see text on a black screen, the computer is currently performing the POST. If the computer stays in that condition and does not move past it, it has probably failed POST.
  • If the video screen displayed anything at all during the startup process but is now black, this probably indicates that the computer failed POST.
  • If the computer is beeping or if Caps/Num/Scroll Locks are flashing, note if there is a particular pattern in which it beeps or flashes.

  • If the computer is not beeping and caps/num/scroll locks are not flashing, unplug all connections and remove all media communication devices (e.g. external monitors); reconnect one at a time and check if the computer functions.
  • For a notebook, press and hold the Fn key and then press the power button. This starts the pre-boot testing and will launch ePSA. In case you have a Desktop at the Dell logo screen tap the F12 key to enter One Time Boot Menu and use the arrow keys to highlight Diagnostics and press enter. Some Desktops do not have an F12 key, to access the boot options you have to press the <0> (zero) key at the Dell logo screen.

If the computer still does not POST click on the links below for steps to troubleshoot:

Back to Top

No Boot

After the computer completes the Power-On Self-Test, it will attempt to boot the operating system.
If the computer advances past the Dell logo screen and then hangs up attempting to load the operating system, it is most likely a No Boot issue.

If the computer does not boot check for further instructions to resolve this issue. To begin with select an Operating System below:

Back to Top

No Video

If the power indications are normal but there is never any video seen on the computer's display during the startup process, this probably indicates a No Video issue.

If you have a desktop computer and the monitor has its own power supply, make sure the monitor has a power indicator showing that it is turned on.

To troubleshoot a No Video issue, click on the links below:

Article ID: SLN85632

Last Date Modified: 05/12/2016 03:28 AM

Rate this article

Easy to understand
Was this article helpful?
Yes No
Send us feedback
Feedback shows invalid character, not accepted special characters are <> () &#92;
Sorry, our feedback system is currently down. Please try again later.

Thank you. Your feedback has been sent.