Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Configuring Static Routes

A static route is an IP address that you manually configure and that the routing protocol does not learn, such as open shortest path first (OSPF). Often, static routes are used as backup routes in case other dynamically learned routes are unreachable.

You can enter as many static IP addresses as necessary.

To configure a static route, use the following command.

Configure a static IP address. CONFIGURATION mode ip route ip-address mask { ip-address | interface [ ip-address]} [ distance] [permanent] [tag tag-value] Use the following required and optional parameters:

  • ip-address : enter an address in dotted decimal format (A.B.C.D).

  • mask : enter a mask in slash prefix-length format (/X).

  • interface : enter an interface type then the slot/port information.

  • distance : the range is from 1 to 255. (optional)

  • permanent: keep the static route in the routing table (if you use the interface option) even if you disable the interface with the route. (optional)

  • tag tag-value : the range is from 1 to 4294967295. (optional)

Example of the show ip route static Command

To view the configured routes, use the show ip route static command. 
Dell#show ip route static
                                 Destination  Gateway                Dist/Metric Last Change
                                 -----------    -------                ----------- -----------
                                 S 2.1.2.0/24   Direct, Nu 0              0/0      00:02:30
                                 S 6.1.2.0/24   via 6.1.20.2, Te 5/0      1/0      00:02:30
                                 S 6.1.2.2/32   via 6.1.20.2, Te 5/0      1/0      00:02:30
                                 S 6.1.2.3/32   via 6.1.20.2, Te 5/0      1/0      00:02:30
                                 S 6.1.2.4/32   via 6.1.20.2, Te 5/0      1/0      00:02:30
                                 S 6.1.2.5/32   via 6.1.20.2, Te 5/0      1/0      00:02:30
                                 S 6.1.2.6/32   via 6.1.20.2, Te 5/0      1/0      00:02:30
                                 S 6.1.2.7/32   via 6.1.20.2, Te 5/0      1/0      00:02:30
                                 S 6.1.2.8/32   via 6.1.20.2, Te 5/0      1/0      00:02:30
                                 S 6.1.2.9/32   via 6.1.20.2, Te 5/0      1/0      00:02:30
                                 S 6.1.2.10/32  via 6.1.20.2, Te 5/0      1/0      00:02:30
                                 S 6.1.2.11/32  via 6.1.20.2, Te 5/0      1/0      00:02:30
                                 S 6.1.2.12/32  via 6.1.20.2, Te 5/0      1/0      00:02:30
                                 S 6.1.2.13/32  via 6.1.20.2, Te 5/0      1/0      00:02:30
                                 S 6.1.2.14/32  via 6.1.20.2, Te 5/0      1/0      00:02:30
                                 S 6.1.2.15/32  via 6.1.20.2, Te 5/0      1/0      00:02:30
                                 S 6.1.2.16/32  via 6.1.20.2, Te 5/0      1/0      00:02:30
                                 S 6.1.2.17/32  via 6.1.20.2, Te 5/0      1/0      00:02:30
                                 S 11.1.1.0/24  Direct, Nu 0              0/0      00:02:30
                                 Direct, Lo 0
                                 --More--

The system installs a next hop that is on the directly connected subnet of current IP address on the interface (for example, if interface tengig 0/0 is on 172.31.5.0 subnet, the system installs the static route).

The system also installs a next hop that is not on the directly connected subnet but which recursively resolves to a next hop on the interface's configured subnet. For example, if tengig 0/0 has ip address on subnet 2.2.2.0 and if 172.31.5.43 recursively resolves to 2.2.2.0, the system installs the static route.
  • When the interface goes down, the system withdraws the route.
  • When the interface comes up, the system re-installs the route.
  • When the recursive resolution is “broken,” the system withdraws the route.
  • When the recursive resolution is satisfied, the system re-installs the route.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"