Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

The show hardware command tree consists of commands used with the Aggregator switch.

• View internal interface status of the stack-unit CPU port which connects to the external management interface. EXEC Privilege mode show hardware stack-unit { 0-5} cpu management statistics
• View driver-level statistics for the data-plane port on the CPU for the specified stack-unit. EXEC Privilege mode show hardware stack-unit { 0-5} cpu data-plane statistics This view provides insight into the packet types entering the CPU to see whether CPU-bound traffic is internal (IPC traffic) or network control traffic, which the CPU must process.
• View the modular packet buffers details per stack unit and the mode of allocation. EXEC Privilege mode show hardware stack-unit { 0-5} buffer total-buffer
• View the modular packet buffers details per unit and the mode of allocation. EXEC Privilege mode show hardware stack-unit { 0-5} buffer unit { 0-1} total-buffer
• View the forwarding plane statistics containing the packet buffer usage per port per stack unit. EXEC Privilege mode show hardware stack-unit { 0-5} buffer unit { 0-1} port { 1-64 | all} buffer-info
• View the forwarding plane statistics containing the packet buffer statistics per COS per port. EXEC Privilege mode show hardware stack-unit { 0-5} buffer unit { 0-1} port { 1-64} queue { 0-14 | all} buffer-info
• View input and output statistics on the party bus, which carries inter-process communication traffic between CPUs. EXEC Privilege mode show hardware stack-unit { 0-5} cpu party-bus statistics
• View the ingress and egress internal packet-drop counters, MAC counters drop, and FP packet drops for the stack unit on per port basis. EXEC Privilege mode show hardware stack-unit { 0-5} drops unit { 0-0} port { 33–56} This view helps identifying the stack unit/port pipe/port that may experience internal drops.
• View the input and output statistics for a stack-port interface. EXEC Privilege mode show hardware stack-unit { 0-5} stack-port { 33–56}
• View the counters in the field processors of the stack unit. EXEC Privilege mode show hardware stack-unit { 0-5} unit { 0-0} counters
• View the details of the FP Devices and Hi gig ports on the stack-unit. EXEC Privilege mode show hardware stack-unit { 0-5} unit { 0-0} details
• Execute a specified bShell command from the CLI without going into the bShell. EXEC Privilege mode show hardware stack-unit { 0-5} unit { 0-0} execute-shell-cmd { command}
• View the Multicast IPMC replication table from the bShell. EXEC Privilege mode show hardware stack-unit { 0-5} unit { 0-0} ipmc-replication
• View the internal statistics for each port-pipe (unit) on per port basis. EXEC Privilege mode show hardware stack-unit { 0-5} unit { 0-0} port-stats [detail]
• View the stack-unit internal registers for each port-pipe. EXEC Privilege mode show hardware stack-unit { 0-5} unit { 0-0} register
• View the tables from the bShell through the CLI without going into the bShell. EXEC Privilege mode show hardware stack-unit { 0-5} unit { 0-0} table-dump { table name}