Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Setting VRRP Group (Virtual Router) Priority

Setting a virtual router priority to 255 ensures that router is the “owner” virtual router for the VRRP group. VRRP elects the MASTER router by choosing the router with the highest priority.

The default priority for a virtual router is 100. The higher the number, the higher the priority. If the MASTER router fails, VRRP begins the election process to choose a new MASTER router based on the next-highest priority.

If two routers in a VRRP group come up at the same time and have the same priority value, the interface’s physical IP addresses are used as tie-breakers to decide which is MASTER. The router with the higher IP address becomes MASTER.

To configure the VRRP group’s priority, use the following command.

Configure the priority for the VRRP group. INTERFACE -VRID mode priority priority The range is from 1 to 255. The default is 100.

Example of the priority Command

Dell(conf-if-te-1/2)#vrrp-group 111
                                 Dell(conf-if-te-1/2-vrid-111)#priority 125
                              

Example of Verifying the VRRP Group Priority

Dell#show vrrp
                                 ------------------
                                 Tengigabitethernet 1/1, VRID: 111, Net: 10.10.10.1
                                 State: Master, 
                                 Priority: 255, Master: 10.10.10.1 (local)
                                 Hold Down: 0 sec, Preempt: TRUE, AdvInt: 1 sec
                                 Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 2343, Gratuitous ARP sent: 5
                                 Virtual MAC address:
                                 00:00:5e:00:01:6f
                                 Virtual IP address:
                                 10.10.10.1 10.10.10.2 10.10.10.3 10.10.10.10
                                 Authentication: (none)
                                 ------------------
                                 Tengigabitethernet 1/2, VRID: 111, Net: 10.10.2.1
                                 State: Master, 
                                 Priority: 125, Master: 10.10.2.1 (local)
                                 Hold Down: 0 sec, Preempt: TRUE, AdvInt: 1 sec
                                 Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 601, Gratuitous ARP sent: 2
                                 Virtual MAC address:
                                 00:00:5e:00:01:6f
                                 Virtual IP address:
                                 10.10.2.2 10.10.2.3
                                 Authentication: (none)
                                 Dell(conf)#
                              

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"