Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

Secure shell (SSH) is a protocol for secure remote login and other secure network services over an insecure network. Dell Networking OS is compatible with SSH versions 1.5 and 2, in both the client and server modes. SSH sessions are encrypted and use authentication. SSH is enabled by default.

• Open an SSH connection and specify the hostname, username, port number,encryption cipher,HMAC algorithm and version of the SSH client. EXEC Privilege mode ssh { hostname} [-l username | -p port-number | -v {1 | 2}| -c encryption cipher | -m HMAC algorithm hostname is the IP address or host name of the remote device. Enter an IPv4 or IPv6 address in dotted decimal format (A.B.C.D).
• SSH V2 is enabled by default on all the modes.
• Display SSH connection information. EXEC Privilege mode show ip ssh

Dell(conf)#ip ssh server version 2
                                 Dell(conf)#do show ip ssh
                                 SSH server                : enabled.
                                 SSH server version        : v2.
                                 SSH server vrf            : default.
                                 SSH server ciphers        : 3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc,aes128-ctr,aes192-ctr,aes256-ctr.
                                 SSH server macs           : hmac-md5,hmac-md5-96,hmac-sha1,hmac-sha1-96,hmac-sha2-256,hmac-sha2-256-96.
                                 SSH server kex algorithms : diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1,diffie-hellman-group14-sha1.
                                 Password Authentication   : enabled.
                                 Hostbased Authentication  : disabled.
                                 RSA       Authentication  : disabled.
                                 Vty          Encryption      HMAC            Remote IP
                                 Dell(conf)#