Search

I have a Power Edge T110 II  with Windows Server 2012 R2 installed. Before I start I know support ends in October of 2023 and we plan to upgrade to at least Server 2019 by then. My issue is that I have not been abled to successfully install the Security Rollup Updates for March 2023 (KB50237

Hi, https://linux.dell.com/repo/hardware/dsu/os_independent/repodata/ is empty 

I have a Dell PowerEdge T350 with an iDRAC9 Basic. The server is connected to a switch which is connected to a router upstream which is connected to the internet. Very simple. Both the server's NIC1 is connected to the switch and also the iDRAC's own UTP LAN card. I enabled the iDRAC and I can acces

I`m trying to communicate with server/idrac via ipmitool. I enabled ipmi over lan in idrac but I have no answer from server via powershell.   PS  C:\Program Files\Dell\SysMgt\OM_iDRACTools\IPMI> .\ipmitool -I lanplus -H 192.168.1.63 -U root -P calvin power status PS C:\Program File

Firmware Baseline doesn't see all servers. Just a Few ABSOLUTELLY identical R750 with absolutely identical configuration, which were successfully onboarded, Refreshed, Inventory ran many times, are showing only with IP address, while others are with hostname. When I tried to create a Firmware/Driv

Hisorry I may not post in the right forum, but we are currently using Dell web system API to get support warranty information per Tag Id (API key to retrieve in https://techdirect.dell.com/Portal/APIs.aspxdisponible )We are now looking into the possibility to do the same -- consult Dell database - t

Hello,My server is R730xd with EXSi 8.0(dell oem),I installed OMSA 11.0, and use OMSA in windows server 2022 (VM).The controller cannot be detected, but it can be detected normally in idrac.And no changes can be made, including power. Everything can not configure.The OMSA is readonly status.iDRAC ve

Hello Was updating to latest DSU and now all my xml file for remote updates stopped working. I then revert back to DSU 2.0.1.0 and after that xml files working again? Dell what has change in xml process? I tried to check and compare the documentation between the version but could not find anythi

It seems to be basically this issue,https://www.dell.com/support/kbdoc/en-us/000202857/cluster-profile-is-either-not-created-or-cluster-is-not-associated-to-a-cluster-profile I'm using the 1.01 OMEVV solution, my host all have the advanced+ license installed on them and show as healthy etc direc

I've upgraded to 3.9.0 version of OpenManage Enterprise. The services plugin shows as "NO COMPATIBLE VERSIONS AVAILABLE" for some reason. I've other appliances at the same level and they have services installed with no issue. I've checked the post upgrade tasks completed. Cleared my browser cache

hi team! We have installed openmange enterprise 3.10 and we have configured several alerts via email SMTP but we dint receive any. Only the test one works.        

This is hopefully a dumb question - but what is the preferred procedure for installing the required drivers inside the OS (Windows Server) on a new poweredge? I have Windows installed, and device manager is showing lots of devices that need drivers. On a desktop I'd just run Dell Command Update but

Hello, A little help on this would be appreciated. Running latest OME. Have a Dell XC740xd server that adds to inventory fine, but I cannot get the Firmware/drivers tab to appear. If I add the server under HCI group to my firmware baseline and run the baseline, the server does not appear there. I

Here is the scenario. OME version is 3.10. IDRAC firmwares are 2.83.83.83 for IDRAC8, and 6.10.30.00 for IDRAC9.  The issue I'm seeing in OME is that the device names are not showing up the same. IDRAC8 device names are showing up as the FQDN that I expect, and if I do a dump of the basic devi

Is there any way to delete a rack in the Power Manager plugin? I was trying to get the rack names consistent, but now racks for both the old name and new name are listed. So far I haven't found a way to delete the old rack.

We have an older, and a brand new DSS 8440. OME says for both "Update file not in catalog"Is there something I need to add, to get these two hosts included, or is this a fault on the Dell end? The last catalog update was downloaded by OME, had a creation date of Feb 27 2023  

Hi, I'm wondering if I can switch from a 100-1000-10000 switch to a 1000-10000 switch. So is the dedicated iDRAC NIC 100 or 1000 Mbe bandwidth? Thank you.

OME has been a great help with firmware upgrades, and everything upgrades just fine, but these three packages always show as compliance unknown and "update file not found in catalog." Should I be worried that none of my servers are getting updated with these?

I'm running OME v.3.10.0 (Build 169) and managing hosts on two different network segments. OME's primary IP is on the same network as some of the hosts. The secondary networks is available through a manually added route. OME can find and see the status of all the hosts on both segments. I can creat

I just purchased the PowerEdge T150.The server still has no OS installed.I plan to install Ubuntu Server 22.04 LTS.I started the server and, following the leaflet that came in the box, I set up the Lifecycle Controller.No problems, all worked well. Next I am advised to update the firmware.I could u