Precision Tower 7910: This model does not support RAID on NVMe SSD's
Summary: This article gives information on why the Precision Tower 7910 doesn't support NVMe RAID.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
The following article advises why the Precision T7910 does not support NVMe RAID.
Does the RAID controller on your T7910 fails to detect your M.2 PCIe SSD?
If you are using an M.2 card (formerly NGFF - Next Generation Form Factor) with 2 PCIe SSD's in a Precision Tower 7910 workstation, you will not be able to detect the drives using your RAID controller.
Why doesn't the T7910 support NVMe RAID?
The system is working as designed, in that the architecture of the card and system does not support NVMe RAID.
NVMe RAID support was included on the next model of Precision Workstation, the Tower and Rack 7920. (Using Intel's Rapid Storage Technology (RSTe) and a Virtual RAID on CPU (VRoC) License key.)
Cause
N/A
Resolution
N/A
Article Properties
Article Number: 000135015
Article Type: Solution
Last Modified: 06 Jun 2024
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.