If your power edge server is running with an unsupported configuration, the system will stop at each startup and request for confirmation by pressing F one to continue or F two to enter system bio.
To avoid this interruption, this error can be disabled, restart your machine and press the F two key immediately after you see the prompt for F two equals system setup option. Once you're on the system set up main menu screen, select system bios on the system bio screen, click miscellaneous settings, change the F one F two prompt on error to disabled.
Click on the finish button, you'll receive this prompt, click on. OK. And then click on exit to allow your machine to reboot. The server should now bypass this error and boot as normal and that's it.
Thanks for watching.
