How to Remove and Install the SD Card on PowerEdge M520

This video will demonstrate the how to remove and install the SD Card on PowerEdge M520.

Replacing The SD vFlash Card:
Remove the blade from the enclosure.
If installed, remove the SD vFlash card from the card slot.
NOTE: The SD vFlash card slot is located underneath the system board at the back of the blade and can be identified by the SD vFlash card slot identification label.
To install the SD vFlash card, insert the contact-pin end of the SD card into the card slot on the vFlash media unit with the card label side facing up.
NOTE: The slot is keyed to ensure correct insertion of the card.
Press inward on the card to lock it into the slot.
Install the blade in the enclosure.