Removing the Display Panel:
Remove:
a. battery
b. display bezel
Remove the screws that secure the display panel and flip the panel over.
Perform the following steps:
Lift the mylar tape and disconnect the low-voltage differential signaling (LVDS) cable from the back of the display panel.
Remove the display panel from the display assembly.
Installing the Display Panel:
Place the display panel to the display assembly.
Align the display panel in its original position.
Connect the low-voltage differential signaling (LVDS) cable to the display panel and attach the tape.
Flip the display panel over and tighten the screws to secure the display panel.
Install:
a. display bezel
b. battery
