CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
Remove the blade from the enclosure.
Open the blade.
Removing A Mezzanine Card:
Open the mezzanine card latch by pressing the ridged area on the latch with your thumb, and lifting the end of the latch.
NOTE: : Hold the mezzanine card by its edges only.
Lift the mezzanine card up and away from the system board.
Installing A Mezzanine Card:
Rotate the card to align the connector on the bottom of the mezzanine card with the corresponding socket on the system board.
Lower the card into place until it is fully seated and the plastic clip on the outer edge of the card fits over the side of the blade chassis.
Close the retention latch to secure the mezzanine card.
Close the blade.
Install the blade in the enclosure.
