This video shows how to replace a PC IE adding card on a power edge. Xr 45 20 C sled before moving the PC IE card read through and follow the safety guidelines to protect your system for potential damage and ensure your personal safety. For more information about safety guidelines. See the Xr 45 20 C service manual at dell dot com forward slash support.
In order to remove the PC IE adding card, you must first remove the PC I cover to remove the PC I cover, loosen the captive screw that secures it to the sled. Rotate the PC I cover outward and remove it from the chassis to remove the PC IE adding card if necessary, press the blue latch on the PC I holder to release the card, hold the expansion card by the edges and pull it from the slot to remove an M 0.2 SSD slide the blue clip to release the SSD lift and remove the SSD from the socket to install the M 0.2 SSD align and insert the SSD into the socket on the board. Slide the blue clip to secure it to install the PC IE adding card align and insert it into the slot.
And if necessary, rotate the blue card holder, clip and click it into place to secure the card to install the PC I cover, insert the end into the slot on the sled and rotate it into place. Then tighten the captive screw that secures the cover to the chassis. For more information or support, visit dell dot com forward slash support.
