Prerequisites
Ensure that you read the Safety instructions .
Follow the procedure listed in Before working inside your system.
Turn off the system, including any attached peripherals.
Disconnect the system from the electrical outlet and disconnect the peripherals.
Remove the system cover.
CAUTION :Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
Removing the internal dual SD module:
Locate the internal dual SD module on the system board.
If installed, remove the SD card(s).
Hold the plastic pull tab and pull the dual SD module out of the system board.
Installing the internal dual SD module:
Locate the IDSDM connector on the system board.
Align the connectors on the system board and the dual SD module.
Push the dual SD module until it is firmly seated on the system board.
Install the SD vFlash media card(s).
Follow the procedure listed in After working inside your system:
Install the system cover.
Reconnect the system to its electrical outlet.
Turn the system on, including any attached peripherals.