How to Replace the IDSM and vFlash Card for PowerScale F900

This video will demonstrate the replacement procedure of an IDSM and vFlash Card for the PowerScale F900.

How to replace the SD module and V flash card in a power scale F900. As always, please ensure you're wearing ESD protection when working inside these systems to begin, unlock the release latch and pull upwards.

Lift off the top cover, locate the SD module as shown and simply lift out using the blue tab, remove the SD and V flash cards making a note of their original positions, return the cards to their original positions, reset the new module back into the board and push into position, reattach the top cover and lock the latch after closing.

Thanks for watching.