This video shows how to adjust the bios and password settings using the dip switches on a power edge. Xr 45 10 C sled before making changes to the dips switch settings, read through and follow safety guidelines to protect your system from potential damage and ensure your personal safety. For more information about safety guidelines.
See the Xr 45 10 C service manual at dell dot com forward slash support. In order to adjust the ipswich settings, you must first remove the cover to remove the cover while pressing the two blue release tabs rotate and lift the cover to adjust the dip switch settings. Use a plastic scribe to clear the envy ra M at boot, move, switch one to the on position and reboot.
Move the switch back to the off position to retain the bios configuration settings at boo to clear the bio's password. Move switch two to the on position and reboot, move the switch back to the off position to re enable the bios password feature to install the cover align the cover with the T nets on the sled, rotate and press down on the top cover until the cover locks into place for more information or support, visit dell dot com forward slash support.
