Alienware m15 R5 System BIOS

- Once the BIOS is upgraded, you cannot downgrade the BIOS to earlier versions. BIOS downgrades are restricted when there are security updates and important fixes with earlier versions that impact the functionality of the system. - BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.

Updating the BIOS from Windows Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com. Note 2: Do not turn off the power or interrupt the BIOS update process during the update. Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed. Download and Installation 1. Click Download File. 2. Click Save to save the file to your hard drive. 3. Browse to the location where you downloaded the file. 4. Double-click the new file. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again. Updating the BIOS from DOS (Non-Windows users) Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com. Note 2: Do not turn off power or interrupt the BIOS update process during the update. Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed. Installation Note: You must provide a bootable USB drive. This executable file does not create the DOS system files. 1. Copy the downloaded file to a bootable USB drive. 2. Power on the system and then Press the F12 key. 3. Select USB Storage Device and boot to the DOS prompt. 4. Run the file by typing following command. For example: C:\ Alienware_Area_51M_R2.exe Where C is the drive letter of the USB device where the executable file is located and Alienware_Area_51M_R2.exe is the name of the downloaded file. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again. Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled) Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com. Note 2: Do not turn off the power or interrupt the BIOS update process during the update. Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed. Installation 1. Copy the downloaded file to a bootable DOS USB drive. 2. Power on the system and then go to BIOS Setup by pressing the F2 key. 3. Go to General > Boot Sequence > Boot > Boot List Option. 4. Change UEFI to Legacy of Boot List Option. 5. Go to Exit > Save Changes and reboot system. 6. Press F12 and then select USB Storage Device and boot to the DOS prompt. 7. Run the file by typing the file name. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again. 8. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option. 9. Change Legacy to UEFI Boot Option. 10. Go to Exit > Save Changes and reboot the system.