Need TPM Support?
For additional helpful information, please refer to our Knowledge Base. View article.Dell TPM 2.0 Firmware Update Utility
Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package contains the Dell TPM 2.0 firmware update utility. Trusted Platform Module (TPM) is a hardware chip on the system motherboard to provide enhanced security. This update addresses the Dell Security Advisories (DSA). A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.
Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
- This release contains security updates as disclosed in the Dell Security Advisory DSA-2024-351. For more information, see Dell Security Advisories and Notices.
Read More
Version
7.2.3.1, A01
Release date
14 Feb 2025
Download Type
Firmware
Category
Security
Importance
CriticalDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Available formats
View Important Information
File Format:
CPG BIOS Executable for Windows/DOS
File Name:
DELLTPM_NPCT750_X11_7.2.3.1_64_v3.exe
File Size:
3.46 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
119d1dc24b6345a6b5c227d021f10123
SHA1:
3304fbea3e814c17f95f313e958e05e3832aafe9
SHA-256:
0e36e93d5bc98e52f37aa155e1e23f447280c701e689b6d62a6eec081038411d
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
- This utility updates the Nuvoton TPM 2.0 firmware to the version 7.2.3.1.
- This firmware update takes no more than 2 minutes to be installed on your system.
- This firmware update takes no more than 2 minutes to be installed on your system.
Supported Operating Systems
Windows 10 IoT Enterprise LTSC 2019
Windows 10 IoT Enterprise LTSC 2021
Windows 11 IoT Enterprise LTSC 2024
Windows Server 2012
Not Applicable
Windows Server 2012 R2
Windows 11
Windows Server 2019 LTSC
Windows Server 2022 LTSC
Windows Server 2016
Windows 10, 64-bit
Applies to
Dell TPM Firmware Update
INFO,SW,TPMFW,NUVOTON
Installation instructions
Note 1: The TPM must be ON and Enabled in BIOS Setup.
Note 2: Ensure to manually reset the Windows Hello Pin credential with or without the TPM clear is performed.
Note 3: Your system requires an immediate restart after installing the firmware update.
Download
1. Click Download File.
2. When the File Download window is displayed, click Save to save the file to your hard drive.
Update the TPM firmware using TPM update utility from Windows environment
1. Browse to the location where you downloaded the file.
2. Double-click the new file.
Windows system restarts automatically and updates the TPM during the system startup. The system reboots automatically after the TPM update is complete.
Note 2: Ensure to manually reset the Windows Hello Pin credential with or without the TPM clear is performed.
Note 3: Your system requires an immediate restart after installing the firmware update.
Download
1. Click Download File.
2. When the File Download window is displayed, click Save to save the file to your hard drive.
Update the TPM firmware using TPM update utility from Windows environment
1. Browse to the location where you downloaded the file.
2. Double-click the new file.
Windows system restarts automatically and updates the TPM during the system startup. The system reboots automatically after the TPM update is complete.
Drivers help and tutorials
For more downloads go to the Drivers and downloads.
For help on using the information on this page, please visit Driver Help and Tutorials.