Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Alienware m15 R5 System BIOS
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Dell Security Advisories (DSA). A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.
To view all drivers for your Alienware m15 Ryzen Edition R5, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...
This is the latest Dell validated version of this driver
This is not the latest Dell validated version of this driver
Alienware_m15_R5_1.17.0.exe | 27.18 MBEnter the Service Tag of your device to check the compatibility of this download with your device.
This is a large file. Depending on your connection speed, it may take some time to download.
File Format:
CPG BIOS Executable for Windows/DOS
File Name:
Alienware_m15_R5_1.17.0.exe
File Size:
27.18 MB
Format Description
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
853632797dd1e493ff1dfc59500f9bbc
SHA1:
66541684a07802ab223e341d4119dc51c9ec8952
SHA-256:
b91f0ecc6d449a2ea50f115485b402d9af52ab19ec40e0380061cd280a933322
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.
Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
- This release contains security updates as disclosed in the Dell Security Advisories DSA-2023-191 and DSA-2023-344. For more information, see Dell Security Advisories and Notices.
Read More
Version
1.17.0, 1.17.0
Release date
20 Feb 2024
Download Type
System BIOS
Category
BIOS
Importance
CriticalDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Available formats
View Important Information
File Format:
BIOS Recovery Image File
File Name:
BIOS_IMG.rcv
File Size:
18.55 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of a BIOS Recovery image file. This file is used for the System BIOS Recovery process to recover a system from a corrupted BIOS.
To ensure the integrity of your download, please verify the checksum value.
MD5:
1b0fccfffee90612a9f0b03024c2467c
SHA1:
1d90fd72336c6d8746207b4faaef8a2b2acb0810
SHA-256:
96c71e061f519e265b0404a72e3e6bbfb41e11799e70b1bb92bf89b4874ed95f
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
- Once the BIOS is upgraded, you cannot downgrade the BIOS to earlier versions. BIOS downgrades are restricted when there are security updates and important fixes with earlier versions that impact the functionality of the system.
- BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.
- BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.
Supported Operating Systems
BIOS
Looking for a different OS? View the list of Dell supported operating systems
Applies to
Alienware m15 A5 system BIOS
Installation instructions
Updating the BIOS from Windows
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS (Non-Windows users)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ Alienware_Area_51M_R2.exe
Where C is the drive letter of the USB device where the executable file is located and Alienware_Area_51M_R2.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
8. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
9. Change Legacy to UEFI Boot Option.
10. Go to Exit > Save Changes and reboot the system.
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS (Non-Windows users)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ Alienware_Area_51M_R2.exe
Where C is the drive letter of the USB device where the executable file is located and Alienware_Area_51M_R2.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
8. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
9. Change Legacy to UEFI Boot Option.
10. Go to Exit > Save Changes and reboot the system.
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.Drivers help and tutorials
For more downloads go to the Drivers and downloads.
For help on using the information on this page, please visit Driver Help and Tutorials.