Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell Precision 7510/7710 System BIOS
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This package provides the Dell System BIOS update and is supported on Dell Precision 7510/7710 for Windows and DOS Operating Systems.
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes: - Fixed sometimes hang up issue in BIOS setup with UEFI boot mode. - Fixed Secure Digital Card can't be disabled in BIOS using Dell Command | Configure. - Fixed black screen issue if exit BIOS setup after attaching external display device on dock. - Fixed no device configuration item issue in boot menu with legacy boot mode. - Fixed incorrect waring message when booting with TB16 dock plugged and system without adapter connected. - Fixed mDP function issue when Discrete Graphics Controller Direct Output Mode is enabled in BIOS setup with NVIDIA graphic card. - Fixed Inappropriate string when update WD15 dock firmware. - Changed TPM clear timeout mechanism behavior.
Enhancements: - Updated Intel Lan firmware. - Update Intel Trusted Execution Technology ACM. - Updated Asset Tag format. - Updated Embedded Controller Engine Firmware. - Updated Intel Video BIOS and Graphics Output Protocol driver. - Updated Intel Management Engine Firmware.
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Download 1. Click Download File to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation Run the BIOS update utility from Windows environment 1. Browse to the location where you downloaded the file and double-click the new file. 2. Windows System will auto restart and update BIOS while system startup screen. 3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users) 1. Copy the downloaded file to a bootable DOS USB key. 2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt. 3. Run the file by typing copied file name where the executable is located. 4. DOS System will auto restart and update BIOS while system startup screen. 5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI boot mode with Load Legacy Option disabled (Non-Windows users) 1. Copy the downloaded file to a bootable DOS USB key. 2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General-Boot Sequence - Boot List Option". 3. Change "UEFI" to "Legacy" of Boot List Option. 4. Click "Apply","Exit" to save changes and reboot system. 5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt. 6. Run the file by typing copied file name where the executable is located. 7. DOS system will auto restart and update BIOS while system startup screen. 8. After BIOS update finished, system will auto reboot. 9. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option". 10. Change "Legacy" to "UEFI" Boot Option. 11. Go to "Exit > Exit Save Changes" and reboot system.
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files. Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you don't enable BitLocker on your system you can ignore it.
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.