Dell Unity: 동기화 복제 상태 동기화 통신 끊김(0x840e)

Summary: 동기화 복제가 성공적으로 생성되었지만 즉시 동기화가 해제됩니다. SPA나 SPB 또는 두 SP 모두에서 문제가 발생할 수 있습니다. (사용자 수정 가능)

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

SRC SP에서 DR SP로의 교차된 FC 연결 문제를 해결하기 위해 FC 조닝이 변경되었습니다.

  • 동기식 복제 세션이 성공적으로 생성되었지만 즉시 동기화가 해제됩니다.
  • 이 문제는 SPA 또는 SPB 또는 두 SP 모두에서 나타날 수 있습니다.
  • 한 SP에서만 문제가 발생하면 세션을 다른 SP로 이동할 수 있으며 정상적으로 작동합니다.

 

Cause

  • FC 연결을 검토한 후 연결이 교차되었으며 올바른 SPA <=> SPA, SPB <=> SPB 연결을 허용하도록 FC 연결 및 조닝 수정이 다시 실행되었습니다.
  • FC 연결이 수정된 후에도 SRC와 DR 모두에서 SP를 재부팅하지 않으면 동기식 복제 세션에서 여전히 동기화 통신 끊김을 보고합니다. 그러나 상호 연결은 OK를 보여줍니다.

 

Resolution

FC 연결 및 조닝이 완료된 동기식 복제를 사용하는 경우 SRC와 DR에서 두 SP를 모두 재부팅해야 합니다.

제안된 변경 사항은 다음과 같습니다. 다음은 향후 "복제 구성" 설명서에서 업데이트됩니다.

조닝 구성
다음을 완료해야 합니다.

  • 포트를 F-포트로 구성하여 잠재적인 문제를 방지하고 다른 유형의 포트는 허용되는 포트 유형 목록에서 제거합니다.
  • 동기식 복제 접속의 경우 소스 시스템의 SPA 포트를 타겟 시스템의 SPA 포트에 접속하십시오. 마찬가지로 소스 시스템의 SPB 포트와 대상 시스템의 SPB 포트

예를 들어 다음과 같습니다.

  • OB_H1450 SPA 포트 4 <--> OB_H1443 SPA 포트 4
  • OB_H1450 SPB 포트 4 <--> OB_H1443 SPB 포트 4
참고:
잘못된 교차 구성에서 Fibre Channel 구성이 수정된 경우.
예를 들어, Fibre Channel 구성이 잘못 교차 구성되었습니다.
  • OB_H1450 SPA 포트 4 <--> OB_H1443 SPB 포트 4
  • OB_H1450 SPB 포트 4 <--> OB_H1443 SPA 포트 4

이제 구성이 수정되었습니다.

  • OB_H1450 SPA 포트 4 <--> OB_H1443 SPA 포트 4
  • OB_H1450 SPB 포트 4 <--> OB_H1443 SPB 포트 4

소스 시스템과 대상 시스템 모두의 SP를 재부팅해야 합니다.

같은 쪽(소스 또는 대상)에 있는 SPA 및 SPB 포트는 포트 구성이 동일해야 합니다. 그러나 소스 시스템의 포트 구성은 대상 시스템의 포트 구성과 다를 수 있습니다. 예를 들어 SPA 포트 4 <--> SPA 입출력 모듈 0 포트 0 및 SPB 포트 4 <--> SPB 입출력 모듈 0 포트 0이 지원됩니다.

 

Additional Information

예: 다음 문제는 FC 연결 토폴로지가 SRC FC 스위치 <> , 코어 FC 스위치 <> , DR FC 스위치인 SPB의 NAS 서버 동기화 복제에서만 확인되었습니다.

SRC: APMxxx1
DR: APMxxx0

2: ID = RS_5
Name = unitySync
Address = x.b.8.115
Alternate Management Address = x.b.8.115
Model = Unity 400
Serial number = APMxxx0
Connection type = sync
Source interfaces = x.a.0.80, x.a.0.81
Local interfaces = x.a.0.80, x.a.0.81
Remote interfaces = x.b.8.130, x.b.8.131
Operational status = OK (0x2)
Health state = OK (5)
Health details = "Communication with the replication host is established. No action is required."
Synchronous FC ports = spa_fc4, spb_fc4


| nasServer | x.x.x.2 x.x.x.2 | Not Configured | B | bond10 bond10 | 0x180000001B | 27 | 25 | TRUE | NFS |


Name = rep_sess_nas_25_nas_34_APMxxx1_APMxxx0
Session type = nas server
Synchronization type = sync
RPO = N/A
Resource type = NAS Server
Sync State = out of sync
Health state = Minor failure (15)
Health details = "The connection with this remote replication host has been lost. On the Replication Connections page, click the Verify and Update Connection button.
Operational status = Lost Sync Communication (0x840e)
Source status = OK
Destination status = OK
Network status = Lost Sync communication
Destination type = remote
Destination system = RS_5
Local role = Source
Source resource = nas_25
Source SP-A interface = x.a.0.80
Source SP-B interface = x.a.0.81
Destination resource = nas_34
Destination SP-A interface = x.b.8.130
Destination SP-B interface = x.b.8.131
Time of last sync = N/A
Sync status =
Sync transfer rate = N/A
Sync transfer size remaining = N/A
Previous transfer rate = N/A
Average transfer rate = N/A
Element pairs = N/A
Hourly Snapshot Retention =
Daily Snapshot Retention =
Hourly snapshot keep for =
Hourly snapshot allow auto-delete =
Daily snapshot keep for =
Daily snapshot allow auto-delete =

EMCSystemLogFile.log:

"2019-02-06T05:43:40.593Z" "Unity_spb" "Kittyhawk_safe" "17322" "unix/spb/root" "INFO" "1:1050207" :: "The minimum requirements for an active mirror have been met. Placing mirror 50060160c7e05f0d:3a000000000000xx in the active state automatically." :: Category=System Component=rmd
"2019-02-06T05:43:40.605Z" "Unity_spb" "Kittyhawk_safe" "17322" "unix/spb/root" "INFO" "1:1050210" :: "Full synchronization has started on image 50060160c7e068xx of the synchronous mirror with ID 50060160c7e05f0d:3a000000000000xx." :: Category=System Component=rmd
"2019-02-06T05:43:40.622Z" "Unity_spb" "Kittyhawk_safe" "17322" "unix/spb/root" "INFO" "1:1050401" :: "K10 50060160c7e068xx became unreachable." :: Category=System Component=rmd
"2019-02-06T05:43:40.633Z" "Unity_spb" "Kittyhawk_safe" "17322" "unix/spb/root" "INFO" "1:1050208" :: "The minimum requirements for an active mirror have not been met. Placing mirror 50060160c7e05f0d:3a00000000000xxx in the attention state automatically." :: Category=System Component=rmd
"2019-02-06T05:43:40.642Z" "Unity_spb" "Kittyhawk_safe" "17322" "unix/spb/root" "INFO" "1:105020c" :: "Image 50060160c7e068xx of the synchronous mirror with ID 50060160c7e05f0d:3a000000000000xx has been system fractured." :: Category=System Component=rmd
"2019-02-06T05:43:42.361Z" "Unity_spb" "Neo_CEM" "28673" "N/A" "ERROR" "14:6077e" :: "Replication session rep_sess_nas_36_nas_40_APMxxx1_APMxxx0 lost sync communication with its remote session" :: Category=User Component=Health

c4_safe_ktrace.log:

2019/02/06-05:43:23.361373 15K 7F239F8DC7xx std:RMD: Failed CMI transmission. CMI Ack Received Status = 0x7e11f061, mirror 103079215142_APMxxx1_0000_103079215144_APM00
2019/02/06-05:43:23.361375 ~~~~ 7F239F8DC7xx std:RMD: mAbortSync() called 103079215142_APMxxx1_0000_103079215144_APMxxx0_0000[6852]
2019/02/06-05:43:23.361377 ~~~~ 7F239F8DC7xx std:RMD: AbortSync Overlap 0 mirror 103079215142_APMxxx1_0000_103079215144_APMxxx0_0000
2019/02/06-05:43:23.361377 ~~~~ 7F239F8DC7xx std:RMD: mAbortSyncOperation() 103079215142_APMxxx1_0000_103079215144_APMxxx0_0000 [6852] 0/0
2019/02/06-05:43:23.361427 44 7F238C79E7xx std:RMD: Sys. Fracturing an image in syncQueue !!
2019/02/06-05:43:23.361428 ~~~~ 7F239F8DC7xx std:RMD: Released Sync Resource 0x7f199d3194xx for SyncIo 0x7f1a95c79d70 in mirror 103079215142_APMxxx1_0000_103079215144_AP
2019/02/06-05:43:23.361429 ~~~~ 7F238C79E7xx std:RMD: configPerformFracture called from line [2674] for mirror 103079215142_APMxxx1_0000_103079215xxx_APMxxx0_0000
2019/02/06-05:43:23.361781 346 7F2395E7Bxx std:PSMSYS:PSMSYS:psmDataAreaCloseCommit(001:014) DEFERRED for DW...
2019/02/06-05:43:23.361870 83 7F2395E7B7xx std:PSMSYS:PSMSYS:psmDataAreaCloseCommit(001:014) DEFERRED for WIP...
2019/02/06-05:43:23.361871 ~~~~ 7F2395E7B7xx std:PSMSYS:PSMSYS:psmDataAreaClose(1:14): PENDED...
2019/02/06-05:43:23.365851 3974 7F238C79E7xx std:RMD: Mirror 103079215142_APMxxx1_0000_103079215144_APMxxx0_0000 - Fracturing an already fractured slave
2019/02/06-05:43:23.365902 46 7F238C79E7xx std:RMD:mirrorFractureSlave: Aborting any pending Syncs for mirror(103079215142_APMxxx1_0000_103079215144_APMxxx0_000
2019/02/06-05:43:23.365903 ~~~~ 7F238C79E7xx std:RMD: mAbortSync() called 103079215142_APMxxx1_0000_103079215144_APMxxx0_0000[5872]
2019/02/06-05:43:23.365905 ~~~~ 7F238C79E7xx std:RMD: Aborted Pending Sync IO in CMI for mirror 103079215142_APMxxx1_0000_103079215144_APMxxx0_0000
2019/02/06-05:43:23.365906 ~~~~ 7F238C79E7xx std:RMD: Mirror 103079215142_APMxxx1_0000_103079215144_APMxxx0_0000 Image #1 has been fractured; 786432 bits in FL

 

Affected Products

Dell EMC Unity Family

Products

Dell EMC Unity Family
Article Properties
Article Number: 000056957
Article Type: Solution
Last Modified: 17 Dec 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.