Dell Unity:同步複寫狀態 遺失同步通訊 (0x840e)
Summary: 同步複製已成功建立,但會立即失去同步。問題可能出現在 SPA 或 SPB 或兩者的 SP 上。(使用者可修正)
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
FC 分區變更是為了解決從 SRC SP 到 DR SP 交叉的 FC 連線問題。
- 已成功建立同步複製工作階段,但會立即失去同步。
- 此問題可能會在 SPA 或 SPB 或兩者的 SP 上出現。
- 當只有一個 SP 上出現問題時,工作階段可能會移至另一個 SP,且運作正常。
Cause
- 在檢閱 FC 連線後,發現連線已交叉,並重新修改 FC 連線和分區,以允許正確的 SPA <=> SPA、SPB <= SPB 連線> 。
- 即使修復了 FC 連接,如果同步複製工作階段不會同時在 SRC 和 DR 上重新啟動 SP,同步複製工作階段仍會報告同步通訊遺失。但是互連顯示還行。
Resolution
在完成 FC 連線和分區的同步複寫中,請務必將 SRC 和 DR 上的 SP 重新開機。
供您參考,建議的更改如下 - 以下內容將在「配置複製」的未來文檔中更新:
分區組
態 請務必完成下列步驟:
- 將連接埠設定為 F 連接埠以避免任何潛在問題,並從允許的連接埠類型清單中移除其他類型的連接埠。
- 對於同步複製連接,請將源系統的 SPA 埠連接到目標系統的 SPA 埠。同樣地,來源系統的 SPB 連接埠會轉換成目的地系統的 SPB 連接埠
例如:
- OB_H1450 SPA 連接埠 4 <--> OB_H1443 SPA 連接埠 4
- OB_H1450 SPB 連接埠 4 <--> OB_H1443 SPB 連接埠 4
注意:
如果光纖通道組態是從不正確的交叉組態更正。
例如,光纖通道配置交叉配置不正確:
如果光纖通道組態是從不正確的交叉組態更正。
例如,光纖通道配置交叉配置不正確:
- OB_H1450 SPA 連接埠 4 <--> OB_H1443 SPB 連接埠 4
- OB_H1450 SPB 連接埠 4 <--> OB_H1443 SPA 連接埠 4
現在,配置已更正:
- OB_H1450 SPA 連接埠 4 <--> OB_H1443 SPA 連接埠 4
- OB_H1450 SPB 連接埠 4 <--> OB_H1443 SPB 連接埠 4
請務必將來源系統和目的地系統的 SP 重新開機。
同一端(源或目標)上的 SPA 和 SPB 埠必須具有相同的埠配置。但是,來源系統上的連接埠組態可能與目的地系統上的連接埠組態不同。例如,支援 SPA 連接埠 4 <--> SPA I/O 模組 0 連接埠 0 和 SPB 連接埠 4 <--> SPB I/O 模組 0 連接埠 0。
Additional Information
範例:只有在 SPB 上的 NAS 伺服器 Syn 複寫上才會出現下列問題,其中 FC 連線拓撲為 SRC FC 交換 <> 器核心 FC 交換 <> 器 DR FC 交換器。
SRC: APMxxx1 DR: APMxxx0 2: ID = RS_5 Name = unitySync Address = x.b.8.115 Alternate Management Address = x.b.8.115 Model = Unity 400 Serial number = APMxxx0 Connection type = sync Source interfaces = x.a.0.80, x.a.0.81 Local interfaces = x.a.0.80, x.a.0.81 Remote interfaces = x.b.8.130, x.b.8.131 Operational status = OK (0x2) Health state = OK (5) Health details = "Communication with the replication host is established. No action is required." Synchronous FC ports = spa_fc4, spb_fc4 | nasServer | x.x.x.2 x.x.x.2 | Not Configured | B | bond10 bond10 | 0x180000001B | 27 | 25 | TRUE | NFS | Name = rep_sess_nas_25_nas_34_APMxxx1_APMxxx0 Session type = nas server Synchronization type = sync RPO = N/A Resource type = NAS Server Sync State = out of sync Health state = Minor failure (15) Health details = "The connection with this remote replication host has been lost. On the Replication Connections page, click the Verify and Update Connection button. Operational status = Lost Sync Communication (0x840e) Source status = OK Destination status = OK Network status = Lost Sync communication Destination type = remote Destination system = RS_5 Local role = Source Source resource = nas_25 Source SP-A interface = x.a.0.80 Source SP-B interface = x.a.0.81 Destination resource = nas_34 Destination SP-A interface = x.b.8.130 Destination SP-B interface = x.b.8.131 Time of last sync = N/A Sync status = Sync transfer rate = N/A Sync transfer size remaining = N/A Previous transfer rate = N/A Average transfer rate = N/A Element pairs = N/A Hourly Snapshot Retention = Daily Snapshot Retention = Hourly snapshot keep for = Hourly snapshot allow auto-delete = Daily snapshot keep for = Daily snapshot allow auto-delete =
EMCSystemLogFile.log:
"2019-02-06T05:43:40.593Z" "Unity_spb" "Kittyhawk_safe" "17322" "unix/spb/root" "INFO" "1:1050207" :: "The minimum requirements for an active mirror have been met. Placing mirror 50060160c7e05f0d:3a000000000000xx in the active state automatically." :: Category=System Component=rmd
"2019-02-06T05:43:40.605Z" "Unity_spb" "Kittyhawk_safe" "17322" "unix/spb/root" "INFO" "1:1050210" :: "Full synchronization has started on image 50060160c7e068xx of the synchronous mirror with ID 50060160c7e05f0d:3a000000000000xx." :: Category=System Component=rmd
"2019-02-06T05:43:40.622Z" "Unity_spb" "Kittyhawk_safe" "17322" "unix/spb/root" "INFO" "1:1050401" :: "K10 50060160c7e068xx became unreachable." :: Category=System Component=rmd
"2019-02-06T05:43:40.633Z" "Unity_spb" "Kittyhawk_safe" "17322" "unix/spb/root" "INFO" "1:1050208" :: "The minimum requirements for an active mirror have not been met. Placing mirror 50060160c7e05f0d:3a00000000000xxx in the attention state automatically." :: Category=System Component=rmd
"2019-02-06T05:43:40.642Z" "Unity_spb" "Kittyhawk_safe" "17322" "unix/spb/root" "INFO" "1:105020c" :: "Image 50060160c7e068xx of the synchronous mirror with ID 50060160c7e05f0d:3a000000000000xx has been system fractured." :: Category=System Component=rmd
"2019-02-06T05:43:42.361Z" "Unity_spb" "Neo_CEM" "28673" "N/A" "ERROR" "14:6077e" :: "Replication session rep_sess_nas_36_nas_40_APMxxx1_APMxxx0 lost sync communication with its remote session" :: Category=User Component=Health
c4_safe_ktrace.log:
2019/02/06-05:43:23.361373 15K 7F239F8DC7xx std:RMD: Failed CMI transmission. CMI Ack Received Status = 0x7e11f061, mirror 103079215142_APMxxx1_0000_103079215144_APM00
2019/02/06-05:43:23.361375 ~~~~ 7F239F8DC7xx std:RMD: mAbortSync() called 103079215142_APMxxx1_0000_103079215144_APMxxx0_0000[6852]
2019/02/06-05:43:23.361377 ~~~~ 7F239F8DC7xx std:RMD: AbortSync Overlap 0 mirror 103079215142_APMxxx1_0000_103079215144_APMxxx0_0000
2019/02/06-05:43:23.361377 ~~~~ 7F239F8DC7xx std:RMD: mAbortSyncOperation() 103079215142_APMxxx1_0000_103079215144_APMxxx0_0000 [6852] 0/0
2019/02/06-05:43:23.361427 44 7F238C79E7xx std:RMD: Sys. Fracturing an image in syncQueue !!
2019/02/06-05:43:23.361428 ~~~~ 7F239F8DC7xx std:RMD: Released Sync Resource 0x7f199d3194xx for SyncIo 0x7f1a95c79d70 in mirror 103079215142_APMxxx1_0000_103079215144_AP
2019/02/06-05:43:23.361429 ~~~~ 7F238C79E7xx std:RMD: configPerformFracture called from line [2674] for mirror 103079215142_APMxxx1_0000_103079215xxx_APMxxx0_0000
2019/02/06-05:43:23.361781 346 7F2395E7Bxx std:PSMSYS:PSMSYS:psmDataAreaCloseCommit(001:014) DEFERRED for DW...
2019/02/06-05:43:23.361870 83 7F2395E7B7xx std:PSMSYS:PSMSYS:psmDataAreaCloseCommit(001:014) DEFERRED for WIP...
2019/02/06-05:43:23.361871 ~~~~ 7F2395E7B7xx std:PSMSYS:PSMSYS:psmDataAreaClose(1:14): PENDED...
2019/02/06-05:43:23.365851 3974 7F238C79E7xx std:RMD: Mirror 103079215142_APMxxx1_0000_103079215144_APMxxx0_0000 - Fracturing an already fractured slave
2019/02/06-05:43:23.365902 46 7F238C79E7xx std:RMD:mirrorFractureSlave: Aborting any pending Syncs for mirror(103079215142_APMxxx1_0000_103079215144_APMxxx0_000
2019/02/06-05:43:23.365903 ~~~~ 7F238C79E7xx std:RMD: mAbortSync() called 103079215142_APMxxx1_0000_103079215144_APMxxx0_0000[5872]
2019/02/06-05:43:23.365905 ~~~~ 7F238C79E7xx std:RMD: Aborted Pending Sync IO in CMI for mirror 103079215142_APMxxx1_0000_103079215144_APMxxx0_0000
2019/02/06-05:43:23.365906 ~~~~ 7F238C79E7xx std:RMD: Mirror 103079215142_APMxxx1_0000_103079215144_APMxxx0_0000 Image #1 has been fractured; 786432 bits in FL
Affected Products
Dell EMC Unity FamilyProducts
Dell EMC Unity FamilyArticle Properties
Article Number: 000056957
Article Type: Solution
Last Modified: 17 Dec 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.