Avamar: le client Linux avagent se bloque ou ne démarre pas après la mise à niveau du plug-in

Summary: Le client Linux avagent ne répond pas ou ne démarre pas après la mise à niveau du plug-in.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Après la mise à niveau de la version du client Linux de la version 7.x vers la version 19.3 ou 19.4, le service avagent échoue une fois démarré ou ne démarre pas du tout.

Dans le fichier avagent.log.

2022-07-21 09:18:01 avagent Info : Agent listening(non-loopback) on interface '10.x.x.x' address 10.x.x.x:28002 port 28002.
2022/07/21-02:18:01.64642 [agentlisten(non-loopback):160650:33]  agent_listen::body after loop
2022/07/21-02:18:01.64649 [agentlisten(non-loopback):160650:33]  agent_listen::body waiting for ctl_sup recvq to be allocated
2022/07/21-02:18:01.67350 [ExitTimer]  Startup, pid=160656 tid=34 stack=0x7fc0caf25d7f td=0x7fc0cc3438b0
2022/07/21-02:18:01.67353 [intrthread]  intrthread::body() received signal, terminate_requested:0
2022/07/21-02:18:01.67353 [avagent]  handleint: SIGNAL 15 ([stage:RSTAGE_WRAPUP/1 excode:EXIT_SIGTERM/173 skipwrap:f])
2022/07/21-02:18:01.67355 [intrthread]  intrthread::body thread exiting
2022/07/21-02:18:01.67359 [intrthread]  Thread finished intrthread
2022/07/21-02:18:01.67366 [(none)]  Startup, pid=160658 tid=32 stack=0x7fc0ca724d7f td=0x7fc0cc342c90
2022/07/21-02:18:01.67370 [avagent]  sysfile::open open64 failed: code 2: No such file or directory
2022/07/21-02:18:01.67371 [avagent]  filedisk::doopen, fdesc == -1 after open attempt
2022/07/21-02:18:01.67376 [avagent]  proc_mutex::proc_mutex semkey -47316641
2022/07/21-02:18:01.67382 [agent_ctl_sup]  Startup, pid=160659 tid=35 stack=0x7fc0c9f23d7f td=0x7fc0cc346020
2022/07/21-02:18:01.67390 [agent_update]  Startup, pid=160660 tid=36 stack=0x7fc0c9722d7f td=0x7fc0cc3469d8
2022/07/21-02:18:01.67391 [agent_update]  agent_update::body start
2022/07/21-02:18:01.67392 [avagent]  client_agent::run exited main loop qt:0 [stage:RSTAGE_WRAPUP/1 excode:EXIT_SIGTERM/173 skipwrap:f]
2022-07-21 09:18:01 avagent Info : Agent Update: Client ID (cid) = 63ef11exxxxxxxxxf674859c6088e2c
2022-07-21 09:18:01 avagent Info : Stopping non-loopback, non-SSL listen thread
2022/07/21-02:18:01.67397 [avagent]    **************** agent_listen::terminate  ****************** 
2022/07/21-02:18:01.67403 [avagent]  agent_listen::terminate

 

Cause

AvamarClient-linux-sles12.xxxx a été installé.
Les packages SLES-12 RPM ne sont pas destinés à une mise à niveau régulière du client. Cela entraîne des problèmes avec OpenSSL.

Resolution

Installez le package Avamar Client SLES11.
AvamarClient-linux-sles11-x86_64-19.x.rpm

Le package Avamar Client SLES11 possède les bibliothèques openSSL liées de manière statique. Cela est nécessaire pour que l’installation d’Avamar côté client fonctionne correctement.

Pour plus d’informations sur l’obtention d’un package client et des étapes d’installation, reportez-vous au Guide d’utilisation d’Avamar Backup Clients. 
https://dl.dell.com/content/manual50688463-dell-emc-avamar-backup-clients-19-7-user-guide.pdf?language=en-us&ps=true

 

Affected Products

Avamar Client for Linux, UNIX, MacOSX

Products

Avamar
Article Properties
Article Number: 000202026
Article Type: Solution
Last Modified: 17 Dec 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.