Connectrix:Cisco MDS:超過閾值時必須記錄 SFP 錯誤或警告值
Summary: 此增強請求是為了在埠管理器檢測到值超過閾值時記錄值。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
當其中一個 SFP 穿越時,交換器會報告事件。如果在最後一天重複多次,則無法知道事件發生時的值。
2024 Jan 7 19:39:38 SWITCH01 %PORT-4-IF_SFP_WARNING: Interface fc4/26, High Rx Power Warning fc4/26 My_Storage_port0 2024 Jan 7 19:49:39 SWITCH01 %PORT-4-IF_SFP_WARNING: Interface fc4/26, High Rx Power Warning cleared fc4/26 srv11959_b764
Cause
當 SFP 狀況超過指定的數位光纖監控閾值,且記錄記錄記錄收到關於閾值層級的持續警示時,會出現此問題。
受影響的 NX-OS 版本:
9.4(1A)
8.4(2F)
受影響的 NX-OS 版本:
9.4(1A)
8.4(2F)
Resolution
因應措施:
將事件添加到 OBFL 錯誤統計資訊允許使用 SFP 電壓詳細資訊自動分析事件。
涉及的步驟:
範例:
新要求的系統記錄格式將類似於:
將事件添加到 OBFL 錯誤統計資訊允許使用 SFP 電壓詳細資訊自動分析事件。
涉及的步驟:
1.Config t 2.hw-module logging onboard 3.hw-module logging onboard error-stats 4.copy running-config startup-config
範例:
---------------------------------------------------------------------------------------------------------------------------
ERROR STATISTICS INFORMATION FOR DEVICE DEVICE: FCMAC
---------------------------------------------------------------------------------------------------------------------------
Interface | | | Time Stamp
Range | Error Stat Counter Name | Count |MM/DD/YY HH:MM:SS
| | |
---------------------------------------------------------------------------------------------------------------------------
fc4/26 |PORT_SFP_HIGH_RX_POWER_DBM | 4.62 |01/07/24 19:39:38
新要求的系統記錄格式將類似於:
2024 Jan 7 19:39:38 SWITCH01 %PORT-4-IF_SFP_WARNING: Interface fc4/26, High Rx Power Warning 2.9 mW fc4/26 My_Storage_port0 2024 Jan 7 19:49:39 SWITCH01 %PORT-4-IF_SFP_WARNING: Interface fc4/26, High Rx Power Warning cleared fc4/26 srv11959_b76
Article Properties
Article Number: 000228511
Article Type: Solution
Last Modified: 19 May 2025
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.