Connectrix: Pmon Hizmeti, "show tech" Komutları Çalıştırıldığında Kesintiye Neden Olan Yeniden Yüklemeyle Sonuçlanıyor
Summary: Pmon hizmeti, 'show tech' komutları çalıştırılırken kesintiye neden olan yeniden yüklemeye neden oluyor.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Pmon hizmeti çalışırken çöküyor ve yeniden başlatılıyor. show port-monitor internal event-history debug komut.
Bu, NX-OS 9.4.1 kod ailesinde görülmüştür.
Bu komut aşağıdaki komutların bir parçası olduğundan bu komutu tetikleyebilir:
show tech-support show tech-support details show tech-support fpm
Aşağıdaki sistem günlüğü, günlük günlük dosyasını gösterecek şekilde günlüğe kaydedilir:
%SYSMGR-3-HEARTBEAT_FAILURE: Service "PMon" sent SIGABRT for not setting heartbeat for last 4 period s. Last heartbeat 46.91 secs ago. %SYSMGR-2-SERVICE_CRASHED: Service "PMon" (PID ...) hasn't caught signal 6 (core will be saved). This issue applies to all MDS platforms. At least one Port Monitor policy must be active and applied to at least one interface.
Cause
Cisco sorunu CSCwh76823
Bu sorun tüm MDS platformları için geçerlidir.
En az bir Port Monitor politikası etkin olmalı ve en az bir arayüze uygulanmalıdır. Bu sorun, bir modülden dahili Bağlantı Noktası İzleyicisi hata ayıklama günlüğünün toplanmasında aşırı gecikmeler olduğunda oluşur.
Resolution
Düzeltmek:
- 9.4.1a'dan sonraki bir
sürüme yükseltmeGeçici çözüm:
Aşağıdaki komutları çalıştırmayın:
show tech-support show tech-support details show tech-support fpm show port-monitor internal event-history debug
Affected Products
Connectrix MDS-Series HardwareArticle Properties
Article Number: 000328074
Article Type: Solution
Last Modified: 04 Jun 2025
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.