PowerPath Management Appliance (PPMA): How to run rpowermt commands on PPMA v3.3 onwards
Summary: How to run rpowermt commands on PPMA v3.3 onwards
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
While running rpowermt commands against any PowerPath/VE host, use "ppadmin" user and its password when prompted.
Note: Root authentication wouldn't work while running rpowermt commands.
Note: Root authentication wouldn't work while running rpowermt commands.
Additional Information
Refer to PPMA IAG for more details:
https://www.dell.com/support/home/en-us/product-support/product/powerpath-management-appliance/docs
https://www.dell.com/support/home/en-us/product-support/product/powerpath-management-appliance/docs
Products
PowerPath Management ApplianceArticle Properties
Article Number: 000211403
Article Type: How To
Last Modified: 09 Jun 2023
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.