Przymus: Jak rozwiązywać problemy, gdy program Storage Center nie może zainicjować dysku.
Summary: Przymus: Jak rozwiązywać problemy, gdy program Storage Center nie może zainicjować dysku.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Alert:
Nie można zainicjować dysku obudowy "disk number" z numerem seryjnym "number" z kontrolera "number"
Cause
Reason:
Kontroler utracił możliwość komunikacji z dyskiem, mimo że niższe warstwy (JBOD, SAS) pozostają aktywne i działają.
Resolution
Możliwe, że jest to łagodny alert, jeśli kontroler próbuje zainicjować dysk, który został niedawno usunięty.
W poważniejszym przypadku kontroler utracił możliwość komunikacji z dyskiem zawierającym dane.
W niektórych przypadkach rozwiązaniem jest ponowne uruchomienie kontrolera. Należy to zrobić w konsultacji z działem pomocy technicznej firmy Dell.
Affected Products
Dell Compellent SC200, Dell Compellent SC220, Dell Compellent SC280, Dell Compellent SC4020, Dell Storage SC8000, Dell Compellent Series 40, Dell Storage SC100, Dell Storage SC120, Dell Storage SC180, Dell Storage SCv2000, Dell Storage SCv2020
, Dell Storage SCv2080
...
Article Properties
Article Number: 000134860
Article Type: Solution
Last Modified: 07 May 2025
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.