如何將 DLMSCR 與 Control-M 磁帶搭配使用

Summary: 如何將 DLMSCR 與 Control-M 磁帶搭配使用

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

DLMSCR 需要特定的報告類型作為大型主機磁帶管理系統的輸入。  若為 BMC Control-M 磁帶，用於處理暫存報告的 JCL 大致為
：

//DLMSCR1  EXEC PGM=DLMSCR,COND=(0,NE),                                                                            
//    PARM='TYPE=CTLM,PREFIX=xx,PREFIXLN=n,DEV=dddd'                                                            
//STEPLIB  DD  DISP=SHR,DSN=<your.DLMSCR.program.library.data.set>                                                                      
//DLMSCR   DD  DISP=SHR,DSN=<your.controlm.tape.report.file>                                             
//DLMLOG   DD  SYSOUT=*                                          

Cause

。

Resolution

如需釐清 JCL 和 parm 需求，請參閱《Disk Library for Mainframe （DLm） z/OS Utilities Guide》（適用於大型主機的磁碟資料庫） z/OS 公用程式指南。   如手冊中所述，對於 Control-M 磁帶，每日刮傷報告或刮傷磁帶的完整清單都需要參數“TYPE=CTLM”。

Control-M 磁帶的報告格式與 Control-T 的報告格式不同！ 

Affected Products

Disk Library for mainframe DLm2500, Disk Library for mainframe DLm8000
Article Properties
Article Number: 000209783
Article Type: Solution
Last Modified: 12 Sept 2025
Version:  7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.